Kirklees · England
Bath Re-enamelling for Kirkheaton homes
Bath re-enamelling across Kirkheaton and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Bath re-enamelling in Kirkheaton without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. We work on pressed steel baths, Victorian roll-tops and acrylic baths, and common reasons people get in touch are staining under the taps and around the waste and a coating lifting around the plughole.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Location
- Kirkheaton (HD5)
- County
- Kirklees
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Common questions in Kirkheaton
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Do you work in Kirkheaton?
Yes. We cover the entire UK and travel to Kirkheaton and the rest of Kirklees. Send photos and we’ll quote, or call 0345 017 0787.
The process
We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Tell us about parking, stairs or access
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Nearby places to Kirkheaton
Other services in Kirkheaton
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Do not let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Landlord and trade work in Kirkheaton
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Common problems we fix in Kirkheaton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- Staining under the taps and around the waste
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
- A roll-top that’s seen better days
What your quote should include
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Whether there are any call-out or travel charges
- Who will actually do the work
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before booking. We look at:
- Doing more than one item at once
- Unusual colours or finishes
- The type of damage
- How easy the damage is to reach
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- One picture of the entire bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Kirkheaton and nearby
Kirkheaton is about 2 miles south-west of Mirfield, in Kirklees. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 189 towns and villages in Kirklees, from the larger towns to small villages. Our nearest city page is Leeds, about 13 miles away.
Postcode districts we cover here: HD5. Whether you live on St John's Avenue, Town Road and St John's Road or a nearby road, we can come to you. If you are just outside Kirkheaton, we cover Upper Heaton (1 mile north), Upper Hopton (1 mile east), Gawthorpe Green (1 mile south-east), Gawthorpe (1 mile south) and Rawthorpe (1 mile west). Larger places within reach include Huddersfield (3 miles west), Dewsbury (4 miles north-east), Batley (5 miles north-east), Liversedge (4 miles north), Cleckheaton (4 miles north) and Heckmondwike (4 miles north-east).
What’s near Kirkheaton
Around Kirkheaton, we work in homes near The Spangled Bull pub, Kirkheaton Primary School and Netherhall Learning Campus High School, among other places. The nearest railway station is Deighton station, roughly 1.2 miles north-west. A little further out are Kingsgate Shopping Centre (2.3 miles south-west) and Automobilia Transport Museum (2 miles west). Not far away are Castle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
