Kent · England
Bath Re-enamelling in Kit's Coty
Bath re-enamelling for Kit's Coty, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
Bath re-enamelling at your home in Kit's Coty
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are a bath that stays dull however much you clean it and worn patches where water runs and sits.
Every repair is covered by our one-year guarantee.
- Where
- Kit's Coty (ME20)
- County
- Kent
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Repairing versus replacing in Kit's Coty
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- No need to remove anything
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
See our prices page or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Kit's Coty
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How it works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes the best part of a day. We leave the room clean and you’ll know when it can be used.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Common problems we fix in Kit's Coty
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Look out for any of the following:
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
- Lots of chips and rust spots
Before you book anyone
- What happens if the damage is worse than the photos show
- Aftercare advice
- Whether the colour is mixed to match
- When it can be used again
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Kit's Coty. The price depends on:
- What the surface is made of
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- A coin beside the damage so we can judge size
- Any details about the material
- Daylight if possible, and no flash reflection
- Details of any past repairs
Most clients in Kit's Coty get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Also near Kit's Coty
More services for Kit's Coty
Kit's Coty: your questions answered
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
How much does bath re-enamelling cost in Kit's Coty?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a photo of the whole item and your postcode.
Do you work in Kit's Coty?
Yes, we do. We send a technician to Kit's Coty for every job, and the price is the same as everywhere else.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Keeping it looking good
Once the work has cured, treat it gently:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Never use suction bath mats
- Do not use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Kit's Coty and nearby
Kit's Coty is about 3 miles south-west of Chatham, in Kent. Wherever you are in the ME20 postcode area, we come to you. We work in all 922 towns and villages across Kent, from the larger towns to small villages. We work right across the region, from Kit's Coty to London (about 29 miles away).
Postcode districts we cover here: ME20. Whether you live on Queenswood Road, Russell Road and Beresford Road or a nearby road, we can come to you. Nearby, we also work in Blue Bell Hill (1 mile north), Walderslade (1 mile north-east), Lordswood (2 miles north-east), Boxley (2 miles south-east) and Lidsing (3 miles east). We also work in nearby towns such as Maidstone (4 miles south), Sittingbourne (10 miles east), Dartford (15 miles north-west), Sevenoaks (14 miles west), Gravesend (9 miles north-west) and Tonbridge (13 miles south-west).
Local landmarks in Kit's Coty
Our clients here include homes close to Tunbury Primary School, Greenacre Academy and Lower Bell pub and the streets around them. Also close by are Westfield Wood (0.9 miles south-east) and St Alban's Church (0.8 miles north). Kit's Coty’s nearest station is Aylesford station, roughly 2.3 miles south-west. Other landmarks nearby include Allington Castle (2.1 miles south) and KIMS hospital (3.4 miles south-east). For a walk, there is Blue Bell Hill and Burham Down.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
