Kent · England
Bath chip & crack repair in Kit's Coty, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Kit's Coty, with a one-year guarantee on every repair.
- Repairs from £95
- Chips on the rim or sides
- A hole punched through by something heavy
Bath repair at your home in Kit's Coty
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you are dealing with an old repair that has yellowed or come loose and chips along the edge of the bath, we can help.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Kit's Coty (ME20)
- County
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. Allow a few hours, depending on the damage, and we’ll tell you if anything changes.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
Getting a price
If you are in Kit's Coty and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
What affects the price in Kit's Coty
Prices start from £95. We charge the same across the UK, including Kit's Coty. The price reflects:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The material
- Access to the area
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your photos
You can typically get a fixed quote without us visiting. To help us price it:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- Something in shot to show the size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Our work in Kit's Coty
Kit's Coty is about 3 miles south-west of Chatham, in Kent. Our technicians come to homes and businesses in Kit's Coty and nearby villages, so nothing has to leave your home. Kit's Coty is one of 922 places in Kent we cover. Our nearest city page is London, about 29 miles away.
We cover every part of ME20. We regularly work on streets such as Queenswood Road, Russell Road and Beresford Road. If you’re just outside Kit's Coty, we cover Blue Bell Hill (1 mile north), Walderslade (1 mile north-east), Lordswood (2 miles north-east), Boxley (2 miles south-east) and Lidsing (3 miles east). Larger places within reach include Maidstone (4 miles south), Sittingbourne (10 miles east), Dartford (15 miles north-west), Sevenoaks (14 miles west), Gravesend (9 miles north-west) and Tonbridge (13 miles south-west).
Local landmarks in Kit's Coty
Around Kit's Coty, we work in homes near Tunbury Primary School, Greenacre Academy and Lower Bell pub and the streets around them. Other local landmarks include Westfield Wood (0.9 miles south-east) and St Alban's Church (0.8 miles north). The nearest railway station is Aylesford station, about 2.3 miles south-west of the centre. A little further out are Allington Castle (2.1 miles south) and KIMS hospital (3.4 miles south-east). The countryside around Kit's Coty includes Blue Bell Hill and Burham Down.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Places near Kit's Coty
Other services in Kit's Coty
When we would advise against a repair
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we can’t reach from underneath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Keeping it looking good
To keep it looking its best for years:
- Protect the bath with a towel when doing jobs nearby
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
- Store metal items away from the bath
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Repair or replace: which is better?
Replacing a fitted bath normally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why Kit's Coty clients choose us
- Honest advice, even when it means no job
- One visit for most repairs
- Everything repaired in place
- Technicians who travel to you, UK-wide
Read our full price list or guide to resurfacing and replacement costs.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Your questions about bath repair in Kit's Coty
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
For landlords and businesses
We work for landlords, letting agents and housing providers in Kit's Coty as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
