Lancashire · England
Bath re-enamelling & resurfacing in Knowle Green, Lancashire
Problem with your bath in Knowle Green? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
Bath re-enamelling at your home in Knowle Green
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We are frequently asked to fix enamel that’s lost its shine and feels rough and brown or grey marks that don’t clean off, in acrylic baths, pressed steel baths and cast iron baths.
You get a one-year guarantee, the same in Knowle Green as everywhere else we work.
- Area
- Knowle Green (PR3)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Knowle Green?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Knowle Green clients choose us
- Usually one visit, start to finish
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- Nothing taken out or refitted
See our pricing or resurfacing vs replacement cost guide.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Our work in Knowle Green
Knowle Green is about 2 miles east of Longridge, in Lancashire. Clients in Knowle Green get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover 482 places across Lancashire. We work right across the region, from Knowle Green to Manchester (28 miles away).
All of PR3 is within our area. Neighbouring places we cover include Ward Green Cross (1 mile south-west), Hothersall (2 miles south-west), Stydd (2 miles south-east), Ribchester (2 miles south-east) and Hesketh Lane (3 miles north-west). Within a short drive, we also cover Preston (7 miles south-west), Burnley (13 miles east), Chorley (13 miles south), Bamber Bridge (9 miles south-west), Accrington (10 miles south-east) and Leyland (11 miles south-west).
Landmarks near Knowle Green
Locally, our jobs take us to homes close to St Cecilia's RC High School. The nearest railway station is Langho station, roughly 4.8 miles south-east. A little further out are Calderstones Hospital (5.5 miles east) and Ribchester Roman Museum (2 miles south-east). The countryside around Knowle Green includes Grimsargh Wetlands.
Nearby places to Knowle Green
What else we do in Knowle Green
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Common problems we fix in Knowle Green
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
The things customers typically mention when they call are:
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
What your quote should include
- How to care for the finish
- How long the guarantee is and what it covers
- How your room will be protected
- Who turns up on the day
Work for landlords and builders
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
If you manage property in Knowle Green, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Common questions in Knowle Green
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Keeping it looking good
Aftercare is simple:
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs right away
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Knowle Green. What changes the price is:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- What the surface is made of
- How much damage there is
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
