Somerset · England
Bath re-enamelling & resurfacing in Knowle, Somerset
Bath re-enamelling across Knowle and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that is failing
How we handle bath re-enamelling in Knowle
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, and can be used again the day after. If you’re dealing with a bath that stays dull however much you clean it and lots of chips and rust spots, we can usually put it right, on cast iron baths, Victorian roll-tops and basins & shower trays alike.
We stand behind the work with a one-year guarantee.
- Location
- Knowle (TA7)
- County
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Knowle as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Our work in Knowle
Knowle is about 3 miles north-east of Bridgwater, in Somerset. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 640 towns and villages in Somerset.
All of TA7 is covered, from the main roads to the quietest streets. If you’re just outside Knowle, we cover Bawdrip (1 mile south-east), Bradney (1 mile south), Horsey (1 mile south-west), Woolavington (1 mile north-east) and Slape Cross (1 mile south). Within a short drive, we also cover Taunton (12 miles south-west), Bridgwater (3 miles south-west), Burnham-on-Sea (6 miles north), Wells (13 miles east), Street (9 miles east) and Glastonbury (10 miles east).
Near you in Knowle
We visit homes around The Knowle Inn, Bridgwater College Academy and Kingsmoor Primary School. The closest station to Knowle is Bridgwater station, about 2.5 miles south-west of the centre. Further afield, we also cover the area around Bridgwater Community Hospital (1.4 miles south-west) and Bridgwater Castle (2.9 miles south-west).
Also near Knowle
What else we do in Knowle
Repair or replace in Knowle?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the next day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- Rooms protected and left tidy
- A year’s guarantee on all work
- One price list for the whole UK
- Work done at your home or business
See our prices page and guide to resurfacing and replacement costs.
Questions from Knowle
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What areas do you cover?
We work UK-wide. Prices don’t change with location.
Do you cover Knowle?
We do. We send a technician to Knowle for every job, and the price is the same as everywhere else.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Prices and what affects them
Resurfacing from £350. You will know the full cost before you book. We look at:
- What kind of damage it is
- Previous DIY repairs that have to come out
- The colour and finish to match
- The material and finish
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- The postcode, so we can plan the visit
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
How to look after the repair
Simple care helps the repair last. Our advice:
- Rinse off hair dye, oils and bath bombs immediately
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Common problems we fix in Knowle
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
If you can see any of these, send us a picture:
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Lots of chips and rust spots
Comparing quotes
- What happens if the damage is worse than the pictures show
- How to care for the finish
- Whether there are any call-out or travel charges
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
