Somerset · England
Bath Re-enamelling for Bradney homes
Bath re-enamelling in Bradney without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Bath re-enamelling at your home in Bradney
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for a roll-top that’s seen better days and a coating lifting around the plughole, in pressed steel baths, cast iron baths and basins & shower trays.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Bradney (TA7)
- Area hub
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
- Get any chip repaired quickly
- Repair dripping taps early
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Covering Bradney
Bradney is about 2 miles north-east of Bridgwater, in Somerset. We travel to homes and businesses in Bradney, so you do not need to take anything anywhere. Bradney is one of 640 towns and villages in Somerset we cover.
Postcode districts we cover here: TA7. Neighbouring places we cover include Bawdrip (1 mile north-east), Horsey (1 mile west), Slape Cross (1 mile south-west), Knowle (1 mile north) and Chedzoy (1 mile south-east). We also work in nearby towns such as Taunton (11 miles south-west), Burnham-on-Sea (7 miles north), Wells (14 miles east), Street (9 miles east), Glastonbury (10 miles east) and Cheddar (12 miles north-east).
Local landmarks in Bradney
In Bradney, that means homes near Kingsmoor Primary School, Bridgwater College Academy and Church of St Michael and All Angels, among other places. Bradney’s nearest station is Bridgwater station, roughly 2 miles south-west. A little further out are Bridgwater Community Hospital (0.9 miles west) and Somerset Brick and Tile Museum (2.1 miles south-west).
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Bradney clients choose us
- We’ll tell you if it’s not worth repairing
- Colour-matched on site
- One price list for the whole UK
- Free fixed quotes from pictures
See our full price list or guide to resurfacing and replacement costs.
Nearby places to Bradney
What else we do in Bradney
For landlords and businesses
Landlords, letting agents and housing providers in Bradney use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to the best part of a day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
How to get a price
To get a price, send a couple of pictures using our quote form or call us. We’ll say straight away if a repair is the right fix.
Read more
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Questions from Bradney
How long does re-enamelling take?
Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you resurface freestanding baths?
Yes. Inside and out.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
When to call us in Bradney
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
Most people get in touch when they notice something like this:
- A roll-top that is seen better days
- A peeling or bubbling previous coating
- Stains that won’t shift
- Lots of chips and rust spots
Before booking anyone
- What happens if the damage is worse than the photos show
- Who will actually do the work
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
