Kent · England
Bath Re-enamelling in Knox Bridge
Full bath re-enamelling and resurfacing for homes and businesses in Knox Bridge and across Kent. Free, fixed quotes from your photos.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that will not shift
Bath re-enamelling in Knox Bridge, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for a dull, rough surface that won’t come clean and chips and rust in more than one place, in acrylic baths, Victorian roll-tops and basins & shower trays.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Knox Bridge (TN17)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
- Never use suction bath mats
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What affects the price in Knox Bridge
Prices start from £350. You will not pay by the hour. The price is based on:
- How much damage there is
- Where the damage is and how we get to it
- Doing more than one item at once
- The type of damage
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A wider photo showing the entire bath
- Natural light rather than flash
Send us a photo of the damage and a wider shot of the entire item, with your TN17 postcode, and we will come back with a fixed quote.
Towns and villages near Knox Bridge
Also in Knox Bridge
What we can’t put right
We would rather lose a job than do one that will not last, so these are the limits:
- A bath split right through the body
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What happens on the day
We agree an arrival time beforehand. Once we’re there, the work takes a full day in most cases. The room is left tidy and you will know when it can be used.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Preparing for the visit
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Common questions in Knox Bridge
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What areas do you cover?
We cover the entire UK, including Knox Bridge and the rest of Kent. Just include your postcode and we’ll offer you dates.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one.
Do you need bath re-enamelling in Knox Bridge?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a picture:
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- Wear marks under the taps
Questions to ask before you book
- Aftercare advice
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the photos show
- Who turns up on the day
Our work in Knox Bridge
Knox Bridge is about 9 miles south of Maidstone, in Kent. Across the TN17 area, we carry out the work at your property. Knox Bridge is one of 922 places in Kent where we work. Our nearest city page is London, about 38 miles away.
Here we cover the TN17 postcode area. We also cover the places around Knox Bridge: Cranbrook Common (1 mile south), Frittenden (1 mile east), Sinkhurst Green (2 miles north-east), Sissinghurst (2 miles south) and Staplehurst (2 miles north). Further out, we also cover Maidstone (9 miles north), Ashford (13 miles east), Royal Tunbridge Wells (12 miles west), Tonbridge (13 miles west), Kings Hill (11 miles north-west) and Foley Park (10 miles north).
Near you in Knox Bridge
Knox Bridge’s nearest station is Staplehurst station, about 2.4 miles north of the centre. Well-known places in the area include Benenden Hospital (4.4 miles south-east) and Sissinghurst Castle (1.9 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
