Gateshead · England
Bath re-enamelling & resurfacing in Lamesley, Gateshead
Fixed-price bath re-enamelling in Lamesley and the surrounding area, typically in one visit.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- The colour and finish to match
- How easy the damage is to reach
- How much damage there is
- How many items we do on one visit
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Where you are, by postcode
- Something in shot to show the size
- What it’s made of, if you know
- Natural light rather than flash
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
How we handle bath re-enamelling in Lamesley
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a roll-top that’s seen better days and thin, worn enamel in places, across basins & shower trays, Victorian roll-tops and acrylic baths.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Lamesley (NE9, NE11)
- Area hub
- Gateshead
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Lamesley
Also in Lamesley
The process
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. Allow a full day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
How to get a price
Most customers in Lamesley get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
When a repair isn’t the answer
A repair is not right for every job, including:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Do not let dyes or oils sit on the finish
- Don’t use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Lamesley as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Lamesley and nearby
Lamesley is about 1 mile south of Chowdene, in Gateshead. Customers in Lamesley get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We cover 49 places across Gateshead.
Every address in NE9 and NE11 is within our area, from the main roads to the quietest streets. If you’re just outside Lamesley, we cover Chowdene (1 mile north), Kibblesworth (1 mile south-west), Low Fell (1 mile north), Team Valley (1 mile north) and Lobley Hill (2 miles north-west). We also work in nearby towns such as Blaydon (5 miles north-west), Dunston (3 miles north-west), Whickham (4 miles north-west), Ryton (7 miles north-west), Winlaton (5 miles north-west) and Felling (3 miles north-east).
What’s near Lamesley
In Lamesley, that means homes near Harlow Green Community Primary School, Church of St Andrew and Hodkin Park, among other places. For rail, the closest station is Dunston station, about 2.7 miles north-west. Other landmarks nearby include Galleries Shopping Centre (3.2 miles east) and Saltwell Park Museum (1.8 miles north).
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Questions from Lamesley
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is there any odour?
Expect a mild smell while we are working.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Do you cover Lamesley?
Yes. We cover the entire UK and come to Lamesley. Send pictures and we’ll quote, or call 0345 017 0787.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Repairing versus replacing in Lamesley
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Lamesley clients choose us
- Repair technicians who travel to you, UK-wide
- Fixed prices from your pictures
- Honest advice, even when it means no job
- We leave the room as we found it
See our full price list and guide to resurfacing and replacement costs.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
