Cheshire East · England
Bath re-enamelling & resurfacing in Larden Green, Cheshire East
Our repair technicians come to Larden Green for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that is seen better days
- Brown or grey marks that do not clean off
Looking after it afterwards
So the finish stays in good condition for years:
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
- Have chips seen to early
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our bath re-enamelling in Larden Green
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with enamel that’s lost its shine and feels rough and an old resurfacing that’s failing, we can help, whatever the material.
A one-year guarantee comes as standard.
- Area
- Larden Green (CW5)
- Area hub
- Cheshire East
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Larden Green
What else we do in Larden Green
Common questions in Larden Green
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your photos and you’ll get one combined price.
The process
We begin by going over the job with you. Then the area is sheeted and masked and we start. It normally takes the best part of a day, and we will tell you if anything changes.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
How to get a price
For a price in Larden Green, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
- Colour mixed on the day to match
Read our prices page and guide to resurfacing and replacement costs.
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What we’re called out for in Larden Green
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
Look out for any of the following:
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Stains that will not shift
- Thin, worn enamel in places
What your quote should include
- Whether the colour is mixed to match
- How to care for the finish
- How your room will be protected
- How long it needs to cure
About Larden Green
Larden Green is about 4 miles west of Nantwich, in Cheshire East. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Larden Green is one of 254 places in Cheshire East where we work. You can also see our page for Liverpool, about 27 miles away.
Our technicians cover all of the CW5 postcode area and the streets around it. That includes homes on Hearn's Lane and Nantwich Road. We also cover the places around Larden Green: Faddiley (1 mile north), Chorley (1 mile south-west), Brindley (1 mile north), Baddiley (2 miles south) and Croxton Green (2 miles west). Further out, we also cover Crewe (7 miles east), Nantwich (4 miles east), Middlewich (11 miles north-east), Sandbach (12 miles north-east), Coppenhall (8 miles north-east) and Holmes Chapel (14 miles north-east).
Near you in Larden Green
The closest station to Larden Green is Wrenbury station, about 3 miles south of the centre. Further afield, we also cover the area around Nantwich Workhouse (4.1 miles east) and Nantwich Castle (3.9 miles east).
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price depends on:
- How many areas need work
- The material and finish
- Access to the area
- Previous DIY repairs that have to come out
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
You can generally get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- Details of any past repairs
- One sharp close-up of the damage
- A wider photo showing the entire bath
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
When a repair isn’t the answer
In fairness, there are a few things a repair won’t fix:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
