Shropshire · England
Bath re-enamelling & resurfacing in Leamoor Common, Shropshire
Full bath re-enamelling and resurfacing for homes and businesses in Leamoor Common and across Shropshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Leamoor Common
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include several chips and rust patches and a coating lifting around the plughole, across acrylic baths, cast iron baths and pressed steel baths.
Big or small, you get the same one-year guarantee.
- Area
- Leamoor Common (SY7)
- Region
- Shropshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Leamoor Common. The price comes down to:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Leamoor Common. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Natural light rather than flash
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Nearby places to Leamoor Common
More services for Leamoor Common
Our work in Leamoor Common
Leamoor Common is about 17 miles south of Shrewsbury, in Shropshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Leamoor Common is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 40 miles away.
Postcode districts we cover here: SY7. We also cover the places around Leamoor Common: Wistanstow (1 mile south), Upper Affcot (1 mile east), The Grove (1 mile south), Halford (2 miles south) and Craven Arms (2 miles south). Larger places within reach include Ludlow (9 miles south-east), Church Stretton (5 miles north), Bayston Hill (14 miles north), Meole Brace (15 miles north), Much Wenlock (14 miles north-east) and Bishop's Castle (7 miles west).
Around Leamoor Common
Typical jobs here are in homes near Wistanstow CofE Primary School and Church of the Holy Trinity, among other places. For rail, the closest station is Craven Arms station, roughly 2.1 miles south of the centre. A little further out are Land of Lost Content (2.3 miles south) and South Shropshire (1.7 miles north-east). For a walk, there is Callow Hill.
Signs you need bath re-enamelling in Leamoor Common
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
The things clients typically mention when they call include:
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
- Wear marks under the taps
- Chips and rust in more than one place
Questions to ask before booking
- How long it needs to cure
- Whether a trained technician does the job
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair will not do:
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Leamoor Common
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Your questions about bath re-enamelling in Leamoor Common
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Do you cover the entire of Shropshire?
We cover the entire UK, including Leamoor Common and the rest of Shropshire. Just include your postcode and we’ll confirm dates.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why choose Surface Doctor in Leamoor Common
- Same prices wherever you are
- Most jobs done in one visit
- Rooms protected and left tidy
- Everything repaired in place
Take a look at our pricing or guide to resurfacing and replacement costs.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a full day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
