Shropshire · England
Bath Re-enamelling for Shrewsbury homes
Bath re-enamelling for Shrewsbury, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
About our bath re-enamelling in Shrewsbury
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Our technicians work on pressed steel baths, basins & shower trays and acrylic baths, and people most often call us about several chips and rust patches and a period or roll-top bath worth keeping.
Every repair is covered by our one-year guarantee, wherever you are in Shropshire.
- Area
- Shrewsbury (SY3, SY1, SY2, SY5)
- Region
- Shropshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Common questions in Shrewsbury
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Signs you need bath re-enamelling in Shrewsbury
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Send us a picture if you notice any of these:
- Chips and rust in more than one place
- A coating lifting around the plughole
- Stains that will not shift
- An original cast iron bath that needs restoring
Questions to ask before you book
- What aftercare is recommended
- Who turns up on the day
- How long it needs to cure
- What prep work is covered
Nearby places to Shrewsbury
More services for Shrewsbury
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Technicians who travel to you, UK-wide
- Generally one visit, start to finish
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
Read our pricing or guide to resurfacing and replacement costs.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a full day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Keep a parking space free if you can
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What affects the price in Shrewsbury
Prices start from £350. Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- The type of damage
- How hard the colour is to match
- Doing more than one item at once
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- Any details about the material
- One picture of the entire bath
- Any earlier repairs or coatings
- A clear, close picture of the problem area
Upload photos of the damage and a wider shot of the whole item, with your SY3 postcode, and we will reply with a fixed quote.
Shrewsbury and the surrounding area
Shrewsbury is about 32 miles south-west of Stoke-on-Trent, in Shropshire. We travel to customers in Shrewsbury and nearby villages, so nothing has to leave your home. Shrewsbury is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 40 miles away.
Jobs in SY3, SY1, SY2 and SY5 work the same way as everywhere else we cover. Jobs here include addresses on St Alkmond's Square, High Street and Market Street. Being close to the A49 and A458, Shrewsbury is simple for us to get to. Nearby, we also work in Kingsland (1 mile south-west), Coleham (1 mile south), Bagley (1 mile north), Frankwell (1 mile west) and Coton Hill (1 mile north-west). We also work in nearby towns such as Madeley (13 miles east), Wem (10 miles north), Broseley (13 miles south-east), Ellesmere (15 miles north-west), Church Stretton (12 miles south) and Bayston Hill (3 miles south). Shrewsbury is one of the larger places we cover in Shropshire.
Landmarks near Shrewsbury
Typical jobs here are in homes near St Mary's Church, Shrewsbury High School and The Crown Inn and the streets around them. Other local landmarks include Wakeman School (within half a mile south) and Coleham Primary School (less than half a mile south). There’s a railway station in Shrewsbury itself: Shrewsbury station. Other landmarks nearby include Clive House Museum (within half a mile south-west) and Darwin Shopping Centre (less than half a mile west). For a walk, there is Bomere Pool and Haughmond Hill.
Honest limits
In fairness, some problems need a different fix:
- Steel that has corroded right through
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
