Fife · Scotland
Bath Re-enamelling in Leslie
Fixed-price bath re-enamelling in Leslie and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Stains that will not shift
About our bath re-enamelling in Leslie
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Our technicians work on basins & shower trays, acrylic baths and Victorian roll-tops, and the jobs we see most are worn patches where water runs and sits and a period or roll-top bath worth keeping.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Leslie (KY6)
- Area hub
- Fife
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the following day.
Preparing for the visit
- Make sure the room can be ventilated
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Questions from Leslie
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
When to call us in Leslie
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Most people get in touch after spotting one of these:
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- Thin, worn enamel in places
- An outdated colour you’d like to change
What to look for in a quote
- Aftercare advice
- What protection goes down before work starts
- Who will actually do the work
- What prep work is covered
For landlords and businesses
Landlords, letting agents and housing providers in Leslie use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Towns and villages near Leslie
Also in Leslie
Leslie and the surrounding area
Leslie is about 2 miles west of Glenrothes, in Fife. We travel to homes and businesses in Leslie, so there is no workshop to go to. We work in 133 places across Fife. Our jobs stretch from Leslie to Edinburgh (about 18 miles away).
We cover every part of the KY6 postcode area. Whether you live on High Street, Douglas Road and Allan Street or anywhere nearby, a technician can come to you. Being close to the A911, Leslie is easy for our technicians to reach. If you’re just outside Leslie, we cover Macedonia (1 mile south-east), Collydean (1 mile north-east), Glenrothes (2 miles east), Cadham (2 miles east) and Kinglassie (2 miles south-west). Further out, we also cover Dunfermline (12 miles south-west), Kirkcaldy (6 miles south), Leven (8 miles east), Cowdenbeath (8 miles south-west), Dysart (6 miles south-east) and Dalgety Bay (13 miles south-west).
Around Leslie
We visit homes around Glenwood High School, Trinity Parish Church and Riverside Park. Leslie’s nearest station is Markinch station, about 3.3 miles east. Well-known places in the area include Glenrothes Hospital (1.3 miles east) and Kingdom Shopping Centre (1.7 miles east). For a walk, there’s East Lomond and Cash Loch.
What affects the price in Leslie
Resurfacing from £350. There is no charge for travel to Leslie. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- What the surface is made of
- Unusual colours or finishes
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A picture taken from further back
- What it’s made of, if you know
Email us a photo of the damage and one of the entire item, and tell us you’re in Leslie, and we will reply with a fixed quote.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Rinse off hair dye, oils and bath bombs straight away
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Store bottles off the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
