Angus · Scotland

Bath Re-enamelling in Craichie

Full bath re-enamelling and resurfacing at your home in Craichie, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Craichie

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Bath re-enamelling at your home in Craichie

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people contact us are thin, worn enamel in places and a roll-top that’s seen better days.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Craichie (DD8)
Area hub
Angus
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • A quick wipe after use keeps limescale away
  • Stick to gentle, non-abrasive cleaners
  • Leave the bath for the full curing time before using it
  • Keep suction mats out of the bath

Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What bath re-enamelling costs

Prices start from £350. Quotes are free and the price is fixed. What we take into account:

  • What the surface is made of
  • What kind of damage it is
  • Unusual colours or finishes
  • Whether we combine several jobs

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Quotes from your photos

Before you send photos, these tips help us give you a firm price:

  • Natural light rather than flash
  • One picture of the whole bath
  • Details of any past repairs
  • One sharp close-up of the damage

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We work for landlords, letting agents and housing providers in Craichie as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

What happens on the day

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s usually ready the following day.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Let us know about parking or access
  • Let us know if it has been repaired before

Getting a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.

Get a fixed quote

Related advice

Should you replace it?

Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Prices start from £350. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted
  • One price list for the whole UK
  • Technicians who travel to you, UK-wide

Read our pricing and bath cost comparison.

Craichie: your questions answered

Can you do the outside of a roll-top?

Yes. Inside and out.

Are there extra charges for Craichie?

Travel is included in the price, and we charge the same wherever you are.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

How durable is a resurfaced bath?

Care for it and it lasts. Avoid abrasive cleaners and suction mats.

Do you come to Craichie?

Yes. We cover the entire UK and travel to Craichie and the rest of Angus. Send photos and we’ll quote, or call 0345 017 0787.

Covering Craichie

Craichie is about 4 miles south-east of Forfar, in Angus. Anywhere in DD8, we carry out the work at your property. Craichie is one of 40 places in Angus where we work. You can also see our page for Edinburgh, about 49 miles away.

All of DD8 is covered, from the main roads to the quietest streets. We also cover the places around Craichie: Tulloes (1 mile south-east), Hillend (1 mile north-west), Lownie Moor (2 miles north-west), Letham (2 miles north-east) and Kingsmuir (2 miles north-west). Further out, we also cover Arbroath (9 miles south-east), Forfar (4 miles north-west), Carnoustie (9 miles south-east), Kirriemuir (8 miles north-west), Brechin (10 miles north-east) and Hunter's Town (8 miles south).

Near you in Craichie

Our clients here include homes close to Dunnichen Church, among other places. Well-known places in the area include Balgavies Castle (3.6 miles north-east) and Meffan Museum and Art Gallery (3.6 miles north-west). Open spaces near Craichie include Loch Fithie.

Map of Craichie © OpenStreetMap contributors

Do you need bath re-enamelling in Craichie?

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

Typical reasons for a call-out include:

  • A bath that stays dull however much you clean it
  • Wear marks under the taps
  • Several chips and rust patches
  • Brown or grey marks that don’t clean off

What to look for in a quote

  • Is the price fixed, and does it include VAT?
  • Whether a trained technician does the job
  • Aftercare advice
  • The length of the guarantee and what it covers

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.