Angus · Scotland
Bath Re-enamelling for Lownie Moor homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Lownie Moor. Send photos for a free, fixed quote.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Lownie Moor
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair acrylic baths, basins & shower trays and pressed steel baths, and common reasons people get in touch are an original cast iron bath that needs restoring and staining under the taps and around the waste.
Whatever the size of the job, you get the same one-year guarantee in Lownie Moor and across Angus.
- Area
- Lownie Moor (DD8)
- Area hub
- Angus
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Keeping it looking good
So the finish stays in good condition:
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
More services for Lownie Moor
Do you need bath re-enamelling in Lownie Moor?
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Contact us if you’ve noticed any of these:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- An old resurfacing that’s failing
- Wear marks under the taps
Comparing quotes
- Whether there are any call-out or travel charges
- How to look after the finish
- What preparation is included
- How the colour is matched
What we can’t put right
We will always be straight with you, so here’s what a repair can’t fix:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
FAQs for Lownie Moor
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you cover the whole of Angus?
We work UK-wide, and that includes Lownie Moor. Prices don’t change with location.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Angus.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Repairing versus replacing in Lownie Moor
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- Repair technicians who travel to you, UK-wide
- Honest advice, even when it means no job
Read our prices page or bath cost comparison.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Lownie Moor. The price reflects:
- Where the damage is and how we get to it
- Whether we combine several jobs
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- Any details about the material
- A photo taken from further back
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Covering Lownie Moor
Lownie Moor is about 2 miles south-east of Forfar, in Angus. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 40 towns and villages in Angus. Our jobs stretch from Lownie Moor to Edinburgh (about 49 miles away).
Every address in DD8 is within our area, from the main roads to the quietest streets. If you are just outside Lownie Moor, we cover Kingsmuir (1 mile north), Hillend (1 mile east), Craichie (2 miles south-east), Forfar (2 miles north-west) and Lunanhead (2 miles north). We also work in nearby towns such as Arbroath (11 miles south-east), Carnoustie (10 miles south-east), Kirriemuir (7 miles north-west), Brechin (10 miles north-east), Hunter's Town (10 miles south-east) and Gardynebourg (10 miles south-east).
Around Lownie Moor
Typical jobs here are in homes near Reid Park and the streets around them. Further afield, we also cover the area around Forfar Castle (2 miles north-west) and Forfar Infirmary (1.6 miles north-west). The countryside around Lownie Moor includes Loch Fithie.
How it works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a full day. We leave the room clean and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Have a window or extractor fan available
How to get a price
Upload photos of the damage and one of the entire item, and tell us you’re in Lownie Moor, and we will come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
