Norfolk · England
Bath Re-enamelling for Letheringsett homes
Bath re-enamelling across Letheringsett and nearby, usually in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
About our bath re-enamelling in Letheringsett
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Typical jobs include a dull, rough surface that won’t come clean and a bath in a colour that no longer suits, on pressed steel baths, cast iron baths and Victorian roll-tops.
You get a one-year guarantee, the same in Letheringsett as everywhere else we work.
- Where
- Letheringsett (NR25)
- County
- Norfolk
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Letheringsett, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Places near Letheringsett
Also in Letheringsett
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Letheringsett and nearby
Letheringsett is about 15 miles north-west of North Walsham, in Norfolk. From the centre of Letheringsett to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Letheringsett is one of 797 towns and villages in Norfolk we cover.
All of NR25 is within our area. That includes homes on Holt Road, Riverside Road and Thornage Road. Neighbouring places we cover include Holt (1 mile east), Saxlingham (2 miles west), Wiveton (3 miles north-west), Salthouse (3 miles north) and Cley next the Sea (3 miles north). Larger places within reach include North Walsham (15 miles south-east), Sheringham (6 miles east), Cromer (10 miles east), Fakenham (10 miles south-west), Aylsham (11 miles south-east) and Wells-next-the-Sea (9 miles west).
What’s near Letheringsett
We visit homes around Church of St Andrew, Holt Community Primary School and Kings Head pub, among other places. Nearby you’ll also find Glandford with Bayfield (1.6 miles north-west) and The Shell Museum (2 miles north-west). Not far away are Kelling Heath.
What affects the price in Letheringsett
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How much damage there is
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Any earlier repairs or coatings
- A close-up of the damage, in focus
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
When a repair isn’t the answer
It helps to know what we cannot do:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Materials we work on in Letheringsett
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day, and we will keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Related advice
Questions from Letheringsett
How long will the bath be out of use?
Usually one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Which areas do you work in?
All of Norfolk, and the rest of the UK. There’s no extra charge for travel.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Signs you need bath re-enamelling in Letheringsett
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Most people get in touch when they notice something like this:
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
- An old resurfacing that is failing
- An outdated colour you’d like to change
What your quote should include
- Whether there are any call-out or travel charges
- How the room is protected while they work
- A fixed price, and whether VAT is included
- What prep work is covered
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
