Warwickshire · England
Bath Re-enamelling for Lighthorne Heath homes
Problem with your bath in Lighthorne Heath? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Bath re-enamelling in Lighthorne Heath, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s a dull, rough surface that won’t come clean and worn patches where water runs and sits, we can normally put it right.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Lighthorne Heath (CV33, CV35)
- County
- Warwickshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Lighthorne Heath
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Everything repaired in place
- Work done at your home or business
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
See our prices page or bath cost comparison.
Places near Lighthorne Heath
More services for Lighthorne Heath
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Lighthorne Heath and nearby
Lighthorne Heath is about 7 miles south of Royal Leamington Spa, in Warwickshire. Anywhere in CV33, we carry out the work at your property. Lighthorne Heath is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Lighthorne Heath to Birmingham (about 25 miles away).
All of CV33 and CV35 is covered, from the main roads to the quietest streets. That includes homes on Campbell Drive, Willoughby Place and Buttle Close and the roads around them. Nearby, we also work in Chesterton Green (2 miles north), Chesterton (2 miles north), Bishop's Itchington (3 miles north-east), Harbury (3 miles north-east) and Deppers Bridge (3 miles north-east). Within a short drive, we also cover Rugby (15 miles north-east), Warwick (7 miles north-west), Royal Leamington Spa (7 miles north), Stratford-upon-Avon (10 miles west), Leamington Spa (7 miles north) and Kenilworth (11 miles north).
Local landmarks in Lighthorne Heath
In Lighthorne Heath, that means homes near Church of St Lawrence and Lighthorne Heath Primary School, among other places. Further afield, we also cover the area around Royal Leamington Spa Rehabilitation Hospital (5.3 miles north-west) and British Motor Museum (0.8 miles south). For a walk, there’s Harbury Spoilbank.
The process
We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
Questions from Lighthorne Heath
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How do I get a price for bath re-enamelling in Lighthorne Heath?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Prices and what affects them
Prices start from £350. Prices are worked out job by job. What matters most is:
- How easy the damage is to reach
- How many areas need work
- The material
- What kind of damage it is
The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any details about the material
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Do you need bath re-enamelling in Lighthorne Heath?
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.
Common reasons people in Lighthorne Heath contact us are:
- An old resurfacing that’s failing
- Several chips and rust patches
- A roll-top that is seen better days
- A coloured bath you want in white
What to look for in a quote
- Who will actually do the work
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- How changes to the job are handled
What a repair cannot fix
It helps to know what we cannot do too:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
