Dorset · England

Bath re-enamelling & resurfacing in Lillington, Dorset

Full bath re-enamelling and resurfacing for homes and businesses in Lillington and across Dorset. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Lillington

Bath re-enamelling in Lillington, done in place

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with several chips and rust patches and stains that won’t shift, we can typically put it right, on pressed steel baths, basins & shower trays and Victorian roll-tops alike.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Area
Lillington (DT9)
Region
Dorset
Warranty
One year on every repair
Quotes
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How we price bath re-enamelling

Resurfacing from £350. There is no area surcharge for Lillington. What changes the price is:

  • What kind of damage it is
  • Access to the area
  • The colour and finish to match
  • How many items we do on one visit

We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

Before you send pictures, a few simple things make all the difference:

  • A close-up of the damage, in focus
  • Your postcode, so we can check dates
  • One picture of the entire bath
  • Good light, ideally daylight, without flash glare

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.

Where we work around Lillington

Lillington is about 5 miles south-east of Yeovil, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 462 towns and villages across Dorset.

Every address in DT9 is within our area. Streets in the area include Higher Street and Lower Street, all of which we cover. Other places close to Lillington include Lake (1 mile north-west), Longburton (1 mile east), Thornford (1 mile west), Sherborne (2 miles north) and Bradford Abbas (3 miles west). Within a short drive, we also cover Dorchester (15 miles south), Gillingham (14 miles north-east), Fordington (15 miles south), Peacemarsh (14 miles north-east), Sturminster Newton (10 miles east) and Beaminster (12 miles south-west).

Landmarks near Lillington

Around Lillington, we work in homes near Leweston School and Church of St Martin. For rail, the closest station is Sherborne station, about 2.1 miles north of the centre. Other landmarks nearby include Castleton Mill (2.6 miles north-east) and Yeovil Hospital (5 miles north-west). For a walk, there is Babylon Hill.

Map of Lillington © OpenStreetMap contributors

Signs you need bath re-enamelling in Lillington

Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.

Keep an eye out for any of the following:

  • Wear marks under the taps
  • A bath that stays dull however much you clean it
  • Lots of chips and rust spots
  • A bath in a colour that no longer suits

What your quote should include

  • Who will actually do the work
  • Aftercare advice
  • What happens if they find more damage
  • A fixed price, and whether VAT is included

How to compare quotes

FAQs for Lillington

Can you redo someone else’s repair?

In most cases. The old repair comes out first.

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Will there be fumes?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What happens after I send pictures?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Repair or replace: which is better?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • Honest advice, even when it means no job
  • One-year guarantee on every repair
  • No need to remove anything
  • CHAS and Constructionline accredited

Read our full price list and bath cost comparison.

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

What we can’t put right

We will not take on work that will not last, so these are the limits:

  • An acrylic bath that flexes badly underfoot
  • Plumbing leaks, which need a plumber
  • Anything hidden under an old coating, until we remove it

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops

Repairs by material

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

How it works

We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a full day in most cases. The room is left tidy.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the following day, the bath is ready.

Preparing for the visit

  • Make sure the room can be ventilated
  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work

Ask for a price

For a price in Lillington, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Read more

Landlords, agents and businesses in Lillington

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.