Cornwall · England
Bath re-enamelling & resurfacing in Moorswater, Cornwall
Full bath re-enamelling and resurfacing in Moorswater, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
Bath re-enamelling at your home in Moorswater
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, we can usually put it right, on cast iron baths, acrylic baths and basins & shower trays alike.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Area
- Moorswater (PL14)
- County
- Cornwall
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Ask for a price
Send us a photo of the damage and a wider shot of the whole item, with your PL14 postcode, and we will reply with a fixed quote.
Read more
Moorswater: your questions answered
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do you work in Moorswater?
Yes. We cover the whole UK and come to Moorswater and the rest of Cornwall. Send pictures and we’ll quote, or call 0345 017 0787.
Moorswater and the surrounding area
Moorswater is about 1 mile west of Liskeard, in Cornwall. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 644 places in Cornwall.
Our visits in PL14 are booked in the same way as anywhere else. Close by, we cover Lamellion (1 mile south-east), Liskeard (1 mile east), Addington (1 mile east), Trembraze (2 miles north-east) and Hendrabridge (2 miles north-east). Larger places within reach include Stonehouse (15 miles east), St Austell (15 miles south-west), Bodmin (10 miles west), Saltash (12 miles east), Launceston (14 miles north-east) and Sandy Bottom (15 miles south-west).
Around Moorswater
Around Moorswater, we work in homes near Liskeard School and Community College, St Martin's Church and Tavernan Carow Public House, among other places. The nearest railway station is Coombe station, about 0.5 miles south of the centre. Nearby you’ll also find Stuart House (0.9 miles east) and Caradon (0.9 miles east). Not far away are Caradon Hill.
Repair or replace in Moorswater?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why book with us
- Most jobs done in one visit
- A fixed quote before booking
- Every repair guaranteed for a year
- We leave the room as we found it
See our full price list and bath cost comparison.
For landlords and businesses
If you manage property in Moorswater, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How many areas need work
- The material
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- Whether it’s been repaired or coated before
- The material, if you know it
- One picture of the entire bath
- Daylight if possible, and no flash reflection
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Other services in Moorswater
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Keep suction mats out of the bath
- Don’t leave a chip unrepaired
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
When we’d advise against a repair
Some jobs aren’t right for a repair, for example:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
