Newport · Wales
Bath Re-enamelling for Liswerry homes
Bath re-enamelling across Liswerry and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A period or roll-top bath worth keeping
Repair or replace in Liswerry?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Liswerry customers choose us
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
See our pricing and bath cost comparison.
Bath re-enamelling in Liswerry without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s lots of chips and rust spots and staining under the taps and around the waste, we can usually put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Liswerry (NP19, NP20)
- Area hub
- Newport
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Liswerry and nearby
Liswerry is about 1 mile south-east of Victoria, in Newport. We visit homes and businesses in Liswerry and nearby villages, so you don’t need to take anything anywhere. Liswerry is one of 69 places in Newport where we work. Our jobs stretch from Liswerry to Birmingham (77 miles away).
Our repair technicians cover all of the NP19 and NP20 postcode area and the streets around it. Whether you live on Nash Road, Fosse Road and Spytty Road or a nearby road, we can come to you. If you are just outside Liswerry, we cover Somerton (1 mile north), Alway (1 mile north-east), Beechwood (1 mile north), Maindee (1 mile north-west) and Victoria (1 mile north-west). Within a short drive, we also cover Rogerstone (4 miles west), Caerleon (3 miles north), Bassaleg (4 miles west), Malpas (3 miles north-west), Graig (4 miles west) and Garth (4 miles west).
Around Liswerry
Our customers here include homes close to Lliswerry Primary School, Corporation Road Baptist Chapel and Belle Vue Park, among other places. Nearby too are Catch22 Include Wales (within half a mile north-west), Lliswery High School (0.6 miles south-east) and The King pub (under half a mile north). Liswerry’s nearest station is Newport (South Wales) station, roughly 1.8 miles north-west of the centre. Other landmarks nearby include Royal Gwent Hospital (1.5 miles west) and Maindee Camp (1 mile north). The countryside around Liswerry includes Alway and Somerton.
Also in Liswerry
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes most of the day for most jobs. We leave the room clean.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Make sure the area is dry
- Tell us about parking, stairs or access
- Clear the area around the damage
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
How to look after the repair
Once the work has cured, treat it gently:
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Respect the curing time we give you
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Work for landlords and builders
If you manage property in Liswerry, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Common problems we fix in Liswerry
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- An old resurfacing that is failing
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
What to look for in a quote
- How the colour is matched
- Who turns up on the day
- Aftercare advice
- How the room is protected while they work
Liswerry: your questions answered
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
What areas do you cover?
Everywhere in the UK, Liswerry included. There’s no extra charge for travel.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What happens after I send pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
About our accreditations · Every repair comes with a one-year guarantee.
