South Gloucestershire · England

Bath Re-enamelling for Little Badminton homes

Local bath re-enamelling for Little Badminton: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • A dull, rough surface that will not come clean
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Little Badminton homes

Bath re-enamelling at your home in Little Badminton

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are often asked to fix a peeling or bubbling previous coating and a coloured bath you want in white, on basins & shower trays, acrylic baths and Victorian roll-tops.

In a village like Little Badminton, some baths have been in for many years. If the bath is sound, bath re-enamelling gives it a new lease of life without disturbing the rest of the room.

Big or small, you get the same one-year guarantee.

Where
Little Badminton (GL9)
Region
South Gloucestershire
Cover
12 months on all our work
Price
From £350. Fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Landlord and trade work in Little Badminton

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

What affects the price in Little Badminton

Prices start from £350. You will know the full cost before booking. We look at:

  • What the surface is made of
  • Any earlier repairs that need removing first
  • Access to the area
  • Doing more than one item at once

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

How to get a fixed price

You can usually get a fixed quote without us visiting. To make it quick:

  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before
  • A wider photo showing the whole bath

For a price in Little Badminton, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Repair or replace: which is better?

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Replacement in Little Badminton means trades, travel and waste removal, while a repair is a single visit.

Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Little Badminton

  • A year’s guarantee on all work
  • Technicians who travel to you, UK-wide
  • CHAS and Constructionline accredited
  • Rooms protected and left tidy

Read our Pricing And Guide to resurfacing and replacement costs.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What we are called out for in Little Badminton

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Signs it’s time to call us include:

  • An outdated colour you’d like to change
  • An old resurfacing that is failing
  • Chips and rust in more than one place
  • Wear marks under the taps

If you live in one of the older homes near a church such as Church of St Michael and All Angels, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.

Before you book anyone

  • What protection goes down before work starts
  • How the colour is matched
  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled

How to compare quotes

How the visit works

Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day. Before leaving, we tell you when it can be used and how to care for it. Somewhere like Little Badminton needs a little journey planning: tell us about narrow lanes, gates, long drives or where to park. Everything for the bath re-enamelling comes with us in one trip.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can generally be used the following day.

How to prepare

  • Keep a parking space clear if you can
  • Let the surface dry out before the visit
  • Let us know if it has been repaired before

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Related advice

Bath re-enamelling around Little Badminton

Little Badminton is about 6 miles east of Yate, in South Gloucestershire. From the centre of Little Badminton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 110 places in South Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 65 miles away.

Postcode districts we cover here for bath re-enamelling: GL9. If you are just outside Little Badminton, we cover Badminton (1 mile south), Luckington (2 miles east), Acton Turville (2 miles south), Didmarton (2 miles north-east) and Alderton (2 miles east). We also work in nearby towns such as Kingswood (12 miles south-west), Mangotsfield (10 miles south-west), Yate (6 miles west), Fishponds (12 miles south-west), Bradley Stoke (11 miles west) and Thornbury (11 miles west).

Map of Little Badminton © OpenStreetMap contributors

Little Badminton questions

Can you restore the original baths in an older house in Little Badminton?

In most cases: original pieces are often better made and harder to replace. Send photos and we’ll advise.

Will you travel to Little Badminton?

We do: small places like Little Badminton are covered as standard. Tell us if access is tricky.

Are there extra charges for Little Badminton?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

How to care for the repair

To keep it looking its best for years:

  • Dry the bath after use to stop limescale
  • Store bottles off the bath
  • Fix dripping taps quickly
  • Clean with a soft cloth and mild detergent

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.