South Gloucestershire · England
Bath re-enamelling & resurfacing in Badminton, South Gloucestershire
Damaged bath in Badminton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- A dull, rough surface that won’t come clean
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Bath re-enamelling at your home in Badminton
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Our repair technicians work on cast iron baths, pressed steel baths and acrylic baths, and people most often call us about a period or roll-top bath worth keeping and staining under the taps and around the waste.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Badminton (GL9)
- County
- South Gloucestershire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
About Badminton
Badminton is about 6 miles east of Yate, in South Gloucestershire. Whether you are in the middle of Badminton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Badminton is one of 110 towns and villages in South Gloucestershire we cover. Our nearest city page is Birmingham, about 66 miles away.
Jobs in GL9 work the same way as everywhere else we cover. That includes homes on High Street, Station Road and Haye's Lane and the roads around them. We also cover the places around Badminton: Little Badminton (1 mile north), Acton Turville (1 mile south), Luckington (2 miles north-east), Alderton (2 miles east) and Burton (2 miles south). Larger places within reach include Kingswood (11 miles south-west), Mangotsfield (10 miles west), Yate (6 miles west), Fishponds (12 miles west), Bradley Stoke (12 miles west) and Thornbury (11 miles north-west).
Local landmarks in Badminton
Typical jobs here are in homes near St Michael and All Angels Church.
Badminton questions
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
How do I get a price for bath re-enamelling in Badminton?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
What affects the price in Badminton
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- The material and finish
- How easy the damage is to reach
- The colour and finish to match
- How many items we do on one visit
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Don’t use the bath until it has fully cured
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Do not leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Badminton
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Nearby places to Badminton
Other services in Badminton
Repairing versus replacing in Badminton
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why book with us
- Fixed prices from your photos
- Honest advice, even when it means no job
- Everything repaired in place
- CHAS and Constructionline accredited
Read our pricing or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
