Worcestershire · England
Bath Re-enamelling for Little Comberton homes
Bath re-enamelling in and around Little Comberton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
Prices and what affects them
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- The colour and finish to match
- How many areas need work
We charge the same wherever you are, with no extra for Little Comberton. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- What it’s made of, if you know
If you’re in Little Comberton and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Bath re-enamelling in Little Comberton, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. If you are dealing with a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in Little Comberton and across Worcestershire.
- Location
- Little Comberton (WR10)
- County
- Worcestershire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Little Comberton clients choose us
- Free fixed quotes from pictures
- One visit for most repairs
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
Take a look at our prices page and guide to resurfacing and replacement costs.
Also near Little Comberton
More services for Little Comberton
Little Comberton and the surrounding area
Little Comberton is about 5 miles west of Evesham, in Worcestershire. Our repair technicians come to homes and businesses in Little Comberton and the surrounding area, so you do not need to take anything anywhere. Our technicians cover all 376 towns and villages across Worcestershire. Our jobs stretch from Little Comberton to Birmingham (27 miles away).
Jobs in WR10 are booked in the same way as anywhere else. From Wick Road, Orchard Drive and Pool Close or anywhere nearby, a technician can come to you. Nearby, we also work in Great Comberton (1 mile south-west), Bricklehampton (1 mile south-east), Elmley Castle (2 miles south-east), Birlingham (2 miles west) and Overbury (3 miles south). Larger places within reach include Worcester (10 miles north-west), Redditch (15 miles north), Great Malvern (12 miles west), Droitwich Spa (13 miles north), Evesham (5 miles east) and Malvern (12 miles west).
Around Little Comberton
Typical jobs here are in homes near Church of St Peter, among other places. Little Comberton’s nearest station is Pershore station, roughly 3.1 miles north. Well-known places in the area include Elmley Castle (2 miles south). The countryside around Little Comberton includes Kemerton Lake and Tiddesley Wood.
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day from start to finish. Before we go, we’ll explain when it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Ensure the area is dry
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
Advice
Aftercare tips
So the finish stays in good condition:
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
- Store bottles off the bath
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Little Comberton: your questions answered
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we’ll plan for it.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you cover Little Comberton?
Yes, we do. Technicians travel to Little Comberton from across the region, and the price is the same as everywhere else.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Landlord and trade work in Little Comberton
Landlords, letting agents and housing providers in Little Comberton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
