Gloucestershire · England
Bath re-enamelling & resurfacing in Overbury, Gloucestershire
Local bath re-enamelling for Overbury: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
FAQs for Overbury
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How we handle bath re-enamelling in Overbury
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include worn patches where water runs and sits and an original cast iron bath that needs restoring, in acrylic baths, Victorian roll-tops and cast iron baths.
Every repair is covered by a one-year guarantee, wherever you are in Gloucestershire.
- Location
- Overbury (GL20)
- Area hub
- Gloucestershire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
What affects the price in Overbury
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The material and finish
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
How to get a fixed quote
You can take the pictures on your phone. Make sure they show:
- Any earlier repairs or coatings
- The material, if you know it
- Where you are, by postcode
- A clear, close picture of the problem area
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Getting a price
Email us a picture of the damage and one of the entire item, and tell us you’re in Overbury, and we’ll reply with a fixed price.
Read more
Work for landlords and builders
If you manage property in Overbury, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Looking after it afterwards
So the finish stays in good condition:
- Fix dripping taps quickly
- Store bottles off the bath
- Never use suction bath mats
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Covering Overbury
Overbury is about 5 miles north-east of Tewkesbury, in Gloucestershire. Whether you are in the middle of Overbury or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Overbury is one of 470 towns and villages in Gloucestershire we cover. You can also see our page for Birmingham, about 31 miles away.
Every address in GL20 is within our area, from the main roads to the quietest streets. Nearby, we also work in Conderton (1 mile south), Kemerton (1 mile west), Westmancote (1 mile west), Lower Westmancote (2 miles west) and Beckford (2 miles south-east). Within a short drive, we also cover Cheltenham (10 miles south), Gloucester (15 miles south-west), Tewkesbury (5 miles south-west), St Paul's (10 miles south), Lansdown (10 miles south) and Bishop's Cleeve (6 miles south).
Landmarks near Overbury
In Overbury, that means homes near Bredon Hill Middle School, Overbury CofE First School and Church of St Faith, among other places. For rail, the closest station is Ashchurch for Tewkesbury station, roughly 3.6 miles south-west of the centre. Nearby you’ll also find Elmley Castle (1.8 miles north-east). Green spaces nearby include Kemerton Lake and Bredon Hill.
Nearby places to Overbury
More services for Overbury
When to call us in Overbury
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted:
- An old resurfacing that’s failing
- Wear marks under the taps
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
What to look for in a quote
- How long it needs to cure
- How changes to the job are handled
- Who will actually do the work
- Whether cleaning and preparation are in the price
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we can’t put right
A repair isn’t right for every job, including:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
