Hampshire · England
Bath re-enamelling & resurfacing in Little Hoddington, Hampshire
Full bath re-enamelling and resurfacing at your home in Little Hoddington, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
When a repair is not the answer
Some jobs are not right for a repair, for example:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Little Hoddington
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Bath re-enamelling in Little Hoddington, done in place
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. We are frequently asked to fix lots of chips and rust spots and enamel that’s lost its shine and feels rough, in pressed steel baths, acrylic baths and basins & shower trays.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Little Hoddington (RG25)
- Area hub
- Hampshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition for years:
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Places near Little Hoddington
Also in Little Hoddington
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Little Hoddington and nearby
Little Hoddington is about 5 miles south-east of Basingstoke, in Hampshire. Our repair technicians come to homes and businesses in Little Hoddington and the surrounding area, so you do not need to take anything anywhere. Little Hoddington is one of 683 towns and villages in Hampshire we cover. You can also see our page for London, about 43 miles away.
Jobs in RG25 work the same way as everywhere else we cover. We regularly work on streets such as Bidden Road, South Hill and Meadowside and the roads around them. Close by, we cover Bidden (1 mile east), South Warnborough (1 mile south-east), Greywell (2 miles north-east), Up Nately (2 miles north) and Long Sutton (2 miles east). Larger places within reach include Basingstoke (5 miles north-west), Farnborough (11 miles north-east), Fleet (8 miles north-east), Aldershot (10 miles east), Alton (6 miles south) and Yateley (10 miles north-east).
Near you in Little Hoddington
Locally, our jobs take us to homes close to Hoddington Arms Public House and Church of St Mary, among other places. For rail, the closest station is Hook station, about 3.7 miles north-east. A little further out are Odiham Castle (2.6 miles north-east) and Basingstoke and North Hampshire Hospital (6 miles north-west). Open spaces near Little Hoddington include Dogmersfield Lake and Holybourne Hill.
Signs you need bath re-enamelling in Little Hoddington
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Common reasons people in Little Hoddington contact us include:
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
- Worn patches where water runs and sits
- An old resurfacing that’s failing
What your quote should include
- Who will actually do the work
- How your room will be protected
- How the colour is matched
- Whether the price covers travel
Your questions about bath re-enamelling in Little Hoddington
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Repair or replace in Little Hoddington?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why Little Hoddington clients choose us
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our prices page or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- How hard the colour is to match
- The type of damage
- Whether we combine several jobs
- How many areas need work
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with nothing added on the day.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Getting a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will say straight away whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
