Hampshire · England

Bath Re-enamelling for Yateley homes

Damaged bath in Yateley? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Yateley

Your questions about bath re-enamelling in Yateley

Can you do the outside of a roll-top?

Yes. Inside and out.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Will the new finish last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Can you repair something that is been repaired before?

Generally, yes. We remove the old repair before doing a new one, so let us know about it.

Is my repair covered?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders across Hampshire.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Bath re-enamelling in Yateley, done in place

Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a roll-top that’s seen better days and a bath in a colour that no longer suits, we can generally put it right.

Whatever the size of the job, it’s backed by a one-year guarantee.

Where
Yateley (GU46)
Region
Hampshire
Cover
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Signs you need bath re-enamelling in Yateley

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Most people contact us after spotting something like this:

  • A bath in a colour that no longer suits
  • Worn patches where water runs and sits
  • Brown or grey marks that do not clean off
  • Enamel that is lost its shine and feels rough

What your quote should include

  • How soon you can use it again
  • Who will actually do the work
  • How changes to the job are handled
  • Whether the colour is mixed to match

10 questions to ask before booking

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

How the visit works

We agree an arrival time beforehand. On site, it takes a full day for most jobs. We leave the room clean.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Make sure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit

Getting a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a fixed quote

Related advice

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

Repair or replace in Yateley?

A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before booking.

Why choose Surface Doctor in Yateley

  • One-year guarantee on every repair
  • A fixed quote before you book
  • Honest advice, even when it means no job
  • Nothing taken out or refitted

See our prices page and resurfacing vs replacement cost guide.

How we price bath re-enamelling

Prices start from £350. We price every job individually, from your pictures. What matters most is:

  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • What the surface is made of

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from photos

We price nearly every job from pictures. This is what we need:

  • The material, if you know it
  • Natural light rather than flash
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

The quickest way to a price is to send a couple of photos through our quote form or call us. We will say immediately whether it can be repaired.

Yateley and the surrounding area

Yateley is about 4 miles north-west of Farnborough, in Hampshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Yateley is one of 683 places in Hampshire we cover. We work right across the region, from Yateley to London (about 34 miles away).

Our visits in GU46 are booked in the same way as anywhere else. Local streets include Hall Lane, Calcott Park and Wistaria Lane. Main roads around Yateley include the B3272, which makes travel easy. Close by, we cover Darby Green (1 mile east), Eversley Cross (1 mile north-west), Little Sandhurst (1 mile north-east), Minley (2 miles south) and Eversley Centre (2 miles west). Larger places within reach include Basingstoke (13 miles south-west), Farnborough (4 miles south-east), Fleet (4 miles south), Aldershot (7 miles south-east), Alton (14 miles south-west) and Tadley (13 miles west).

Around Yateley

Our customers here include homes close to Yateley School, Cranford Park Primary and Church of St Peter. You will also find Ambarrow Court (1.4 miles north-east) and Dog & Partridge pub (under half a mile north-east). The nearest railway station is Sandhurst station, about 1.3 miles north-east. Further afield, we also cover the area around Staff College Museum (3.6 miles east) and Pinewood Hospital (3.6 miles north-east). Not far away are Horseshoe Lake and Hitches Hill.

Map of Yateley © OpenStreetMap contributors

Honest limits

Before booking, it’s worth knowing the limits too:

  • A metal bath with a through crack
  • Steel that has corroded right through
  • Problems we cannot see until an old finish comes off

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Yateley

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

For landlords and businesses

If you manage property in Yateley, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.