Torfaen · Wales
Bath re-enamelling & resurfacing in Little Mill, Torfaen
Bath re-enamelling in Little Mill without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Little Mill. The price depends on:
- How many items we do on one visit
- The colour and finish to match
- Whether old repairs or coatings need taking off
- The type of damage
We charge the same wherever you are, so there’s no premium for Little Mill. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
You can take the pictures on your phone. Ensure they show:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A clear, close picture of the problem area
Email us pictures of the damage and a wider shot of the entire item, with your NP4 postcode, and we’ll come back with a fixed quote.
Bath re-enamelling in Little Mill without replacing anything
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We work on pressed steel baths, Victorian roll-tops and acrylic baths, and people most often call us about several chips and rust patches and a bath in a colour that no longer suits.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Little Mill (NP4)
- County
- Torfaen
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Signs you need bath re-enamelling in Little Mill
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.
Typical reasons for a call-out include:
- A dull, rough surface that won’t come clean
- A roll-top that is seen better days
- A peeling or bubbling previous coating
- Wear marks under the taps
Comparing quotes
- Whether cleaning and preparation are in the price
- Who turns up on the day
- Whether the price covers travel
- A fixed price, and whether VAT is included
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
We work for landlords, letting agents and housing providers in Little Mill as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Little Mill and the surrounding area
Little Mill is about 3 miles north-east of Pontypool, in Torfaen. Across the NP4 area, we carry out the work at your property. We work in all 67 towns and villages across Torfaen. You can also see our page for Birmingham, about 69 miles away.
Postcode districts we cover here: NP4. Whether you live on Melyn Bach Avenue, Greenmeadow Crescent and Ty Draw Lane or anywhere nearby, we can come to you. Close by, we cover Penpedairheol (1 mile east), Glascoed (1 mile south-east), Croes y pant (1 mile north-west), Penperlleni (1 mile north) and Monkswood (1 mile east). Further out, we also cover Cwmbrân (5 miles south), Pontypool (3 miles south-west), Cwmbran Central (5 miles south), Abersychan (4 miles west), Pant-teg (3 miles south-west) and Blaenavon (6 miles north-west).
Near you in Little Mill
Locally, our jobs take us to homes close to Goytre Fawr Primary School, St Michael's Church and Halfway House and the streets around them. Little Mill’s nearest station is Pontypool and New Inn station, roughly 2.2 miles south-west. Nearby you will also find Usk Rural Life Museum (3.6 miles south-east) and Trostrey Castle (2.4 miles east). Open spaces near Little Mill include Cwm Lickey Lake and Pen Coed Di-haul.
- Local facilities include St Cadocs and Penygarn (2.6 miles west)
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why us?
- Most jobs done in one visit
- Free fixed quotes from pictures
- Same prices wherever you are
- Repair technicians who travel to you, UK-wide
See our prices page or guide to resurfacing and replacement costs.
What a repair can’t fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Also near Little Mill
More services for Little Mill
Questions from Little Mill
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Do you cover the entire of Torfaen?
Across the UK, and that includes Little Mill. Prices don’t change with location.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Little Mill.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
What we do, step by step
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the next day.
Getting ready for the visit
- Ensure the room can be ventilated
- Keep a parking space free if you can
- Let the surface dry out before the visit
Ask for a price
If you are in Little Mill and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
