Oxfordshire · England
Bath Re-enamelling in Little Milton
Damaged bath in Little Milton? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
Bath re-enamelling in Little Milton without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, we can help, on acrylic baths, cast iron baths and pressed steel baths alike.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Little Milton (OX44)
- Area hub
- Oxfordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
We would rather lose a job than do one that won’t last, so these are the limits:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the day after.
Preparing for the visit
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Make sure the area is dry
How to get a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you’re in Little Milton, and we’ll come back with a fixed quote.
Read more
Covering Little Milton
Little Milton is about 6 miles south-east of Oxford, in Oxfordshire. Jobs in Little Milton are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in 443 places across Oxfordshire. Our jobs stretch from Little Milton to London (46 miles away).
Jobs in OX44 are booked in the same way as anywhere else. We regularly work on streets such as High Street, Milton Manor Drive and Haseley Road and the roads around them. Other places close to Little Milton include Denton (2 miles north-west), Cuddesdon (2 miles north-west), Blenheim (3 miles north-west), Garsington (3 miles west) and Wheatley (3 miles north-west). We also work in nearby towns such as Oxford (6 miles north-west), Didcot (9 miles south-west), Bicester (14 miles north), Abingdon-on-Thames (8 miles west), Thame (6 miles north-east) and Henley-on-Thames (15 miles south-east).
What’s near Little Milton
Locally, our jobs take us to homes close to Church of St James and Little Milton Church of England Primary School, among other places. Nearby you will also find NHS Oxfordshire Clinical Commissioning Group (4.9 miles north-west) and Aston Martin Heritage Trust Museum (3.2 miles south-west). For a walk, there’s Wells Farm and Shotover.
What affects the price in Little Milton
Resurfacing from £350. There is no charge for travel to Little Milton. The price comes down to:
- Whether we combine several jobs
- The type of damage
- How easy the damage is to reach
- How many areas need work
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
If you are in Little Milton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Also near Little Milton
Also in Little Milton
Landlord and trade work in Little Milton
If you manage property in Little Milton, we will quote for several properties at once. Send pictures for each one and we will price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Little Milton clients choose us
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- Typically one visit, start to finish
- Every repair guaranteed for a year
See our pricing or resurfacing vs replacement cost guide.
How to care for the repair
It’s all simple stuff:
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Don’t leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we are called out for in Little Milton
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
These are the problems we are asked about most:
- Lots of chips and rust spots
- A coating lifting around the plughole
- An outdated colour you’d like to change
- Stains that won’t shift
What to look for in a quote
- What happens if they find more damage
- Whether there are any call-out or travel charges
- Who will actually do the work
- How your room will be protected
Little Milton: your questions answered
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you cover Little Milton?
Yes, we do. Technicians travel to Little Milton from across the region, and the price is the same as everywhere else.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
About our accreditations · Every repair comes with a one-year guarantee.
