Warwickshire · England
Bath Re-enamelling in Little Orton
Bath re-enamelling in Little Orton without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A roll-top that is seen better days
Bath re-enamelling at your home in Little Orton
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with chips and rust in more than one place and a period or roll-top bath worth keeping, we can help.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Little Orton (CV9)
- County
- Warwickshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Little Orton and the surrounding area
Little Orton is about 5 miles north of Atherstone, in Warwickshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 324 places in Warwickshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 19 miles away.
Every address in CV9 is within our area. If you’re just outside Little Orton, we cover Norton Juxta Twycross (1 mile north-east), Austrey (1 mile north-west), Orton-on-the-Hill (1 mile south-west), Twycross (1 mile east) and Appleby Parva (2 miles north). Further out, we also cover Nuneaton (9 miles south), Bedworth (12 miles south), Fordbridge (14 miles south-west), Atherstone (5 miles south), Castle Vale (14 miles south-west) and Chilvers Coton (10 miles south).
Around Little Orton
Locally, our jobs take us to homes close to Church of the Holy Trinity and The Moore's Arms Public House, among other places. The nearest railway station is Polesworth station, about 3.5 miles south-west of the centre. Nearby you will also find Agricultural & Rural Museum (less than half a mile north-east) and Ratcliffe Culey (4.1 miles south).
Common questions in Little Orton
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Do you resurface freestanding baths?
Yes. Inside and out.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What areas do you cover?
Across the UK, and that includes Little Orton. Our prices are the same everywhere.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Also near Little Orton
What else we do in Little Orton
What affects the price in Little Orton
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- How easy the damage is to reach
- How many areas need work
- The material and finish
- What kind of damage it is
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from pictures
You can generally get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Whether it’s been repaired or coated before
- Natural light rather than flash
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Common problems we fix in Little Orton
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Send us a picture if you notice any of these:
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
Comparing quotes
- Whether the price is fixed and includes VAT
- How your room will be protected
- What aftercare is recommended
- Whether they match the colour on site
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
What we do, step by step
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a full day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Ensure the area is dry
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Aftercare tips
Looking after the surface is easy:
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
What you get with us
- Everything repaired in place
- Free fixed quotes from pictures
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Little Orton
We work for landlords, letting agents and housing providers in Little Orton as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
