Warwickshire · England
Bath Re-enamelling in Orton-on-the-Hill
Local bath re-enamelling for Orton-on-the-Hill: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A bath that stays dull however much you clean it
Common questions in Orton-on-the-Hill
Do you work in Orton-on-the-Hill?
Yes. We cover the whole UK and come to Orton-on-the-Hill and the rest of Warwickshire. Send photos and we will quote, or call 0345 017 0787.
Which areas do you work in?
All of Warwickshire, and the rest of the UK. There’s no extra charge for travel.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first.
Bath re-enamelling in Orton-on-the-Hill, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We are frequently asked to fix an original cast iron bath that needs restoring and a coating lifting around the plughole, on acrylic baths, Victorian roll-tops and pressed steel baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Orton-on-the-Hill (CV9)
- County
- Warwickshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We work for landlords, letting agents and housing providers in Orton-on-the-Hill as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Prices and what affects them
Resurfacing from £350. You will know the full cost before you book. We look at:
- The material and finish
- Access to the area
- The colour and finish to match
- Previous DIY repairs that have to come out
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- One picture of the entire bath
- One sharp close-up of the damage
- Details of any past repairs
- The postcode, so we can plan the visit
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How to look after the repair
It’s all simple stuff:
- Don’t use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs straight away
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Honest limits
It helps to know what we cannot do:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
What we do, step by step
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. It normally takes a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
- Ensure the area is dry
How to get a price
If you are in Orton-on-the-Hill and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Do you need bath re-enamelling in Orton-on-the-Hill?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted any of these:
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Lots of chips and rust spots
- An old resurfacing that’s failing
What to look for in a quote
- Whether there are any call-out or travel charges
- What prep work is covered
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Nearby places to Orton-on-the-Hill
More services for Orton-on-the-Hill
Orton-on-the-Hill and nearby
Orton-on-the-Hill is about 5 miles east of Tamworth, in Warwickshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 324 towns and villages across Warwickshire. Our nearest city page is Birmingham, about 18 miles away.
Every address in CV9 is within our area. Whether you live on Main Street, The Green and Pipe Lane or anywhere nearby, we can come to you. If you are just outside Orton-on-the-Hill, we cover Warton (1 mile west), Little Orton (1 mile north-east), Austrey (2 miles north), Sheepy Magna (2 miles south-east) and Twycross (2 miles east). Further out, we also cover Nuneaton (8 miles south-east), Bedworth (11 miles south), Fordbridge (13 miles south-west), Atherstone (4 miles south), Castle Vale (12 miles south-west) and Chilvers Coton (9 miles south-east).
Around Orton-on-the-Hill
Our clients here include homes close to Unicorn Inn and Church of St Edith and the streets around them. For rail, the closest station is Polesworth station, roughly 2.5 miles west. Further afield, we also cover the area around Agricultural & Rural Museum (1.7 miles north-east) and Ratcliffe Culey (3.1 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
