Derbyshire · England
Bath re-enamelling & resurfacing in Litton, Derbyshire
Full bath re-enamelling and resurfacing for homes and businesses in Litton and across Derbyshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
How we handle bath re-enamelling in Litton
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, on acrylic baths, basins & shower trays and pressed steel baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Litton (SK17)
- Region
- Derbyshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Nearby places to Litton
More services for Litton
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Litton. The price reflects:
- Doing more than one item at once
- How many areas need work
- How easy the damage is to reach
- Any earlier repairs that need removing first
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- A clear, close picture of the problem area
- What it’s made of, if you know
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
Send us pictures of the damage and one of the entire item, with your SK17 postcode, and we’ll reply with a fixed price.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Litton questions
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
What areas do you cover?
The whole UK, including all of Derbyshire. Send your postcode with your photos and we’ll offer you dates.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
How do I get a price for bath re-enamelling in Litton?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Covering Litton
Litton is about 6 miles east of Buxton, in Derbyshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 532 places in Derbyshire, from the larger towns to small villages. Our nearest city page is Manchester, about 24 miles away.
We cover every part of SK17. Streets in the area include Church Lane, Sterndale Close and Dale View, and we cover them all. Nearby, we also work in Lane Head (1 mile north), Tideswell (1 mile north-west), Priestcliffe (3 miles south-west), Little Longstone (3 miles south-east) and Taddington (3 miles south-west). Larger places within reach include Chesterfield (14 miles east), Buxton (6 miles west), Dronfield (12 miles east), Glossop (14 miles north-west), Matlock (12 miles south-east) and New Mills (12 miles north-west).
Near you in Litton
Locally, our jobs take us to homes close to Litton CofE Primary School, The Anchor pub and Christ Church and the streets around them. Other landmarks nearby include Newholme Hospital (5.2 miles south-east) and Castle Hill (4.2 miles east). The countryside around Litton includes Taddington Moor.
Repairing versus replacing in Litton
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
- Honest advice, even when it means no job
- Same prices wherever you are
Take a look at our prices page or resurfacing vs replacement cost guide.
What happens on the day
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Clear the area around the damage
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
