Devon · England
Bath re-enamelling & resurfacing in Liverton, Devon
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Liverton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
When to call us in Liverton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Keep an eye out for any of the following:
- Chips and rust in more than one place
- A roll-top that’s seen better days
- Wear marks under the taps
- An old resurfacing that is failing
What your quote should include
- What happens if the damage is worse than the pictures show
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
Bath re-enamelling in Liverton, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a coloured bath you want in white and enamel that’s lost its shine and feels rough, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Liverton (TQ12)
- Area hub
- Devon
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
What we cannot put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly.
Materials we work on in Liverton
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Liverton. The price reflects:
- The material
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How hard the colour is to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send photos for a quote
Before you send pictures, these tips help us give you a firm price:
- Details of any past repairs
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Keeping it looking good
So the finish stays in good condition for years:
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs right away
- Do not leave a chip unrepaired
Dry the bath after use if possible, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Landlords, agents and businesses in Liverton
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Liverton questions
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Also in Liverton
Repairing versus replacing in Liverton
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We leave the room as we found it
- Same prices wherever you are
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page and guide to resurfacing and replacement costs.
Liverton and nearby
Liverton is about 4 miles north-west of Newton Abbot, in Devon. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 586 places in Devon, from the larger towns to small villages.
We cover every part of TQ12. You will find streets such as Ley Close and Potters Yard, and we cover them all. Other places close to Liverton include Coldeast (1 mile east), Brimley (1 mile north), Heathfield (1 mile east), Bovey Tracey (2 miles north) and Chudleigh Knighton (3 miles north-east). Within a short drive, we also cover Exeter (13 miles north-east), Exmouth (13 miles east), Newton Abbot (4 miles south-east), Teignmouth (8 miles east), Kingsteignton (4 miles east) and Dawlish (10 miles east).
Near you in Liverton
Our customers here include homes close to The Star Inn and Blackpool Church of England Primary School, among other places. The nearest railway station is Newton Abbot station, roughly 4.5 miles south-east of the centre. Other landmarks nearby include Bovey Tracey Hospital (2.3 miles north) and House of Marbles (1.3 miles north). The countryside around Liverton includes Haytor Rocks and Chudleigh Knighton Heath.
About our accreditations · Every repair comes with a one-year guarantee.
