Argyll and Bute · Scotland
Bath Re-enamelling for Lochgilphead homes
Our technicians come to Lochgilphead for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
Common questions in Lochgilphead
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What areas do you cover?
Everywhere in the UK, Lochgilphead included. Travel is included in the price.
How much does bath re-enamelling cost in Lochgilphead?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your PA31 postcode.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Bath re-enamelling in Lochgilphead, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s brown or grey marks that don’t clean off and several chips and rust patches, we can help.
Every repair is covered by a one-year guarantee, wherever you are in Argyll and Bute.
- Area
- Lochgilphead (PA31)
- Region
- Argyll and Bute
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Lochgilphead
Lochgilphead is about 27 miles west of Greenock, in Argyll and Bute. From the centre of Lochgilphead to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover all 118 towns and villages in Argyll and Bute, from the larger towns to small villages. You can also see our page for Glasgow, about 47 miles away.
Our visits in PA31 work the same way as everywhere else we cover. Streets in the area include Oban Road, Wilson Road and Smithy Lane, all of which we cover. Being close to the A83 and A816, Lochgilphead is easy for our technicians to reach. Other places close to Lochgilphead include Ceann Loch Gilb (1 mile south-east), Ardrishaig (2 miles south), Cairnbaan (2 miles north-west), Bridgend (3 miles north) and Kilmichael Glassary (3 miles north). Being one of Argyll and Bute’s larger places, Lochgilphead is somewhere we visit often. If you are somewhere remote, call first so we can plan the visit.
What’s near Lochgilphead
In Lochgilphead, that means homes near The Comm Public House, Lochgilphead High School and Christ Church, among other places. A little further out are Mid Argyll Community Hospital (0.7 miles east). Not far away are Cam Loch.
What we cannot put right
It helps to know what we can’t do too:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Related advice
Landlords, agents and businesses in Lochgilphead
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we are called out for in Lochgilphead
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Clients usually contact us about:
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Stains that won’t shift
Comparing quotes
- What preparation is included
- A fixed price, and whether VAT is included
- How your room will be protected
- Whether the price covers travel
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs straight away
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Places near Lochgilphead
What else we do in Lochgilphead
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Lochgilphead. The price depends on:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- A picture taken from further back
- Any details about the material
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
