North Somerset · England
Bath Re-enamelling in Locking
Full bath re-enamelling and resurfacing for homes and businesses in Locking and across North Somerset. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
Questions from Locking
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
It’s been repaired before. Can you still fix it?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Locking.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Bath re-enamelling at your home in Locking
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you are dealing with lots of chips and rust spots and worn patches where water runs and sits, we can help.
Big or small, it’s backed by a one-year guarantee.
- Area
- Locking (BS24)
- Area hub
- North Somerset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Locking
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Common problems we fix in Locking
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is normally perfectly sound.
The most common problems we are called about are:
- Lots of chips and rust spots
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A coloured bath you want in white
What to look for in a quote
- How long it needs to cure
- How the colour is matched
- If travel is included in the price
- Whether the price is fixed and includes VAT
Looking after it afterwards
Once the work has cured, treat it gently:
- Do not leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
How the visit works
We agree an arrival time beforehand. Once we’re there, the work takes the best part of a day. We leave the room clean.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Open a window if you can
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
How to get a price
Most customers in Locking get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Also near Locking
More services for Locking
Covering Locking
Locking is about 2 miles south-east of Weston-super-Mare, in North Somerset. We travel to homes and businesses in Locking and the surrounding area, so you do not need to take anything anywhere. Locking is one of 86 places in North Somerset where we work.
Every address in BS24 is within our area. Whether you live on Oxford Square, Cruickshank Grove and Bishops Path or a nearby road, we can come to you. Nearby, we also work in Elborough (1 mile south-east), West Wick (1 mile north), Hutton (1 mile south-west), Worle (2 miles north-west) and Weston-super-Mare (2 miles north-west). Further out, we also cover Portishead (12 miles north-east), Clevedon (7 miles north), Nailsea (9 miles north-east), Yatton (5 miles north-east), Port Marine (12 miles north-east) and Pill (14 miles north-east). Being one of North Somerset’s larger places, Locking sees plenty of our work.
Around Locking
Our clients here include homes close to Coach House, Parklands Educate Together Primary and Parish Church of St Augustine, among other places. Nearby too are Worle Community School (1.5 miles north-west) and Hamwood Park (2 miles south). The closest station to Locking is Worle station, about 1.5 miles north of the centre. A little further out are Weston General Hospital (2.9 miles west) and Banwell Museum (2 miles east). For a walk, there’s Blake's Pools and Worlebury Hill.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Locking. The price comes down to:
- Any earlier repairs that need removing first
- The material and finish
- Unusual colours or finishes
- Where the damage is and how we get to it
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- Something in shot to show the size
- One sharp close-up of the damage
- What it’s made of, if you know
- Whether it’s been repaired or coated before
Upload photos of the damage and a wider shot of the whole item, with your BS24 postcode, and we will reply with a fixed quote.
Landlords, agents and businesses in Locking
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
