Shropshire · England
Bath Re-enamelling in Longslow
Full bath re-enamelling and resurfacing at your home in Longslow, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coloured bath you want in white
- Lots of chips and rust spots
How we handle bath re-enamelling in Longslow
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include an old resurfacing that’s failing and lots of chips and rust spots, on basins & shower trays, acrylic baths and pressed steel baths.
A one-year guarantee comes as standard.
- Where
- Longslow (TF9)
- Region
- Shropshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- We leave the room as we found it
- Fixed prices from your photos
- Straight answers about what a repair can do
- A year’s guarantee on all work
Take a look at our pricing or guide to resurfacing and replacement costs.
Nearby places to Longslow
Other services in Longslow
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- A bath that is rusted through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Longslow
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Your questions about bath re-enamelling in Longslow
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
How much does bath re-enamelling cost in Longslow?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Are there extra charges for Longslow?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take most of the day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
What affects the price in Longslow
Prices start from £350. Every quote is fixed and free. What we look at:
- The type of damage
- How many items we do on one visit
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- What it’s made of, if you know
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Longslow and the surrounding area
Longslow is about 1 mile north-west of Market Drayton, in Shropshire. Jobs in Longslow are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 433 places across Shropshire. We work right across the region, from Longslow to Liverpool (about 38 miles away).
Here we cover the TF9 postcode area. Close by, we cover Longford (1 mile south-west), Bletchley (2 miles south-west), Newstreet Lane (2 miles north-west), Moretonwood (2 miles west) and Adderley (3 miles north). Further out, we also cover Whitchurch (8 miles north-west), Wem (10 miles south-west), Sundorne (15 miles south-west), Harlescott (15 miles south-west), Loggerheads (5 miles east) and Bomere Heath (15 miles south-west).
What’s near Longslow
Around Longslow, we work in homes near Market Drayton Junior School and Grove School. Well-known places in the area include Market Drayton Museum And Resource Centre (1.4 miles south-east).
Do you need bath re-enamelling in Longslow?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The most common problems we’re called about are:
- Stains that won’t shift
- A period or roll-top bath worth keeping
- Several chips and rust patches
- A bath that stays dull however much you clean it
Comparing quotes
- What preparation is included
- The length of the guarantee and what it covers
- What aftercare is recommended
- How your room will be protected
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
