Lincolnshire · England

Bath Re-enamelling for Raithby homes

Bath re-enamelling across Raithby and nearby, usually in one visit.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Raithby?

When to call us in Raithby

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

The things customers typically mention when they call include:

  • Wear marks under the taps
  • Several chips and rust patches
  • Brown or grey marks that don’t clean off
  • A roll-top that’s seen better days

Comparing quotes

  • What prep work is covered
  • Aftercare advice
  • Whether the colour is mixed to match
  • How your room will be protected

10 questions to ask before booking

Bath re-enamelling at your home in Raithby

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for wear marks under the taps and a coating lifting around the plughole, in Victorian roll-tops, acrylic baths and basins & shower trays.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Area
Raithby (LN11)
County
Lincolnshire
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

What your bath is made of matters

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

Repair or replace: which is better?

If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.

Why us?

  • Every repair guaranteed for a year
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • No need to remove anything

Take a look at our prices page and bath cost comparison.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Raithby and the surrounding area

Raithby is about 2 miles south-west of Louth, in Lincolnshire. From the centre of Raithby to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We cover 732 places in Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 70 miles away.

Every address in LN11 is covered, from the main roads to the quietest streets. Other places close to Raithby include Maltby (1 mile south), Hallington (1 mile north-west), Dovendale (1 mile south-west), Louth (2 miles north-east) and South Elkington (2 miles north). We also work in nearby towns such as New Waltham (13 miles north), Horncastle (10 miles south), Mablethorpe (12 miles east), Humberston (13 miles north), Woodhall Spa (15 miles south-west) and Sutton on Sea (13 miles east).

Near you in Raithby

We visit homes around King Edward VI Grammar School, Church of St Peter and Hubbard's Hills, among other places. A little further out are County Hospital Louth (2.1 miles north-east) and Louth Museum (2.1 miles north-east).

Map of Raithby © OpenStreetMap contributors

Prices and what affects them

Prices start from £350. We do not charge extra for travel to Raithby. The price comes down to:

  • The type of damage
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match

Our prices are the same across the UK, with no extra for Raithby. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed quote

Most quotes are done from photos alone. To help us price it:

  • Your postcode, so we can check dates
  • Details of any past repairs
  • A wider photo showing the entire bath
  • A coin or ruler next to the damage for scale

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

What we do, step by step

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Keep a parking space free if you can
  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area

Ask for a price

The quickest way to a price is to send two or three photos through our quote form or ring us. We will say right away whether it can be repaired.

Get a free quote

Related advice

When we’d advise against a repair

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • A bath split right through the body
  • Anything hidden under an old coating, until we remove it
  • A bath that is rusted through

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths

Raithby questions

Can you redo someone else’s repair?

Normally, yes. The old repair comes out first, so let us know about it.

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Are there extra charges for Raithby?

We do not add a call-out fee. Your fixed quote includes everything.

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

What information do you need?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

Can you quote from photos?

In nearly every case. If photos do not show enough, we’ll ask for another angle.

Does the bath have to be removed?

No. We resurface it in place, so nothing else is disturbed.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Have chips seen to early
  • Don’t use the bath until it has fully cured
  • Keep toiletries on a shelf rather than in the bath
  • Wash away dyes and oils after use

Wipe the bath dry after use where you can, and rinse off any bath products.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.