Northumberland · England
Bath re-enamelling & resurfacing in Low Brunton, Northumberland
Bath re-enamelling for Low Brunton, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Bath re-enamelling in Low Brunton, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with wear marks under the taps and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Low Brunton (NE46)
- Region
- Northumberland
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wash away dyes and oils after use
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
Low Brunton: your questions answered
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Northumberland.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Low Brunton and the surrounding area
Low Brunton is about 16 miles north-west of Consett, in Northumberland. From the centre of Low Brunton to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Low Brunton is one of 189 towns and villages in Northumberland where we work. You can also see our page for Newcastle upon Tyne, about 19 miles away.
Postcode districts we cover here: NE46. Neighbouring places we cover include Chollerford (1 mile north), Wall (1 mile south), Humshaugh (1 mile north), Barrasford (2 miles north) and Fourstones (2 miles south-west). Larger places within reach include Hexham (4 miles south), Prudhoe (12 miles east), Ponteland (15 miles east), Haltwhistle (14 miles west), Corbridge (5 miles south-east) and Haydon Bridge (6 miles south-west).
Local landmarks in Low Brunton
We visit homes around Church of St George, Humshaugh Church of England First School and Hadrian Hotel and the streets around them. For rail, the closest station is Hexham station, about 3.8 miles south. Other landmarks nearby include Walwick Tower (0.6 miles west) and Chesters Roman Fort and Clayton Museum (0.7 miles west).
- Local facilities include Tynedale (0.7 miles north)
Also near Low Brunton
More services for Low Brunton
Do you need bath re-enamelling in Low Brunton?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
Before booking anyone
- How to care for the finish
- If travel is included in the price
- When it can be used again
- What preparation is included
Repair or replace in Low Brunton?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
What you get with us
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- A fixed quote before you book
- Usually one visit, start to finish
Read our full price list or bath cost comparison.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What we can’t put right
It helps to know what we cannot do:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
