Bradford · England
Bath re-enamelling & resurfacing in Low Moor, Bradford
Bath re-enamelling for Low Moor, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Bath re-enamelling at your home in Low Moor
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a peeling or bubbling previous coating and lots of chips and rust spots, across basins & shower trays, acrylic baths and cast iron baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Low Moor (BD12, BD6)
- Region
- Bradford
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Dust sheets down, tidy finish
- Most jobs done in one visit
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
Read our full price list or bath cost comparison.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Honest limits
A repair isn’t right for every job, including:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before you book. We look at:
- Unusual colours or finishes
- The material
- How many items we do on one visit
- Access to the area
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Signs you need bath re-enamelling in Low Moor
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People normally call us when they notice one of these:
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- A coloured bath you want in white
- A coating lifting around the plughole
Comparing quotes
- How to look after the finish
- How soon you can use it again
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
Also near Low Moor
What else we do in Low Moor
Low Moor: your questions answered
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Do you cover Low Moor?
Yes. We work across the UK and come to Low Moor. Send pictures and we will quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How much does bath re-enamelling cost in Low Moor?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Our work in Low Moor
Low Moor is about 3 miles south of Bradford, in Bradford. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our technicians cover 140 places in Bradford, from the larger towns to small villages. Our jobs stretch from Low Moor to Leeds (about 10 miles away).
We work across the BD12 and BD6 postcode area. Whether you live on Carr Lane, Hird Road and Park Road or anywhere nearby, a technician can come to you. Low Moor sits on or near the A641, so getting to you is simple. We also cover the places around Low Moor: Odsal (1 mile north-east), North Bierley (1 mile north-east), Wyke Common (1 mile south), Wibsey (1 mile north) and Oakenshaw (1 mile east). Larger places within reach include Bradford (3 miles north), Keighley (10 miles north-west), Bingley (7 miles north), Shipley (5 miles north), Baildon (7 miles north) and Ilkley (12 miles north).
Local landmarks in Low Moor
Locally, our jobs take us to homes close to Buttershaw Business and Enterprise College, Church of St Mark and The Royal pub and the streets around them. Also close by are Buttershaw Business & Enterprise College Academy (1.4 miles north-west) and Hill Top CofE Primary School (within half a mile north-west). Low Moor’s nearest station is Low Moor station, roughly 0.6 miles east. Nearby you will also find Transperience (0.8 miles east) and St. Luke's Hospital (2.2 miles north). Open spaces near Low Moor include Heaton Reservoir Nature Reserve.
Landlord and trade work in Low Moor
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
