Bradford · England
Bath Re-enamelling in Wyke Common
Bath re-enamelling in and around Wyke Common: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- An old resurfacing that’s failing
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Ask for a price
Most customers in Wyke Common get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Bath re-enamelling in Wyke Common, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Typical jobs include an outdated colour you’d like to change and several chips and rust patches, across basins & shower trays, acrylic baths and Victorian roll-tops.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Wyke Common (BD12, BD19)
- Area hub
- Bradford
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Wyke Common
Other services in Wyke Common
Looking after it afterwards
How the surface is treated afterwards matters:
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
- Do not leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Common problems we fix in Wyke Common
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Most people contact us when they notice one of these:
- Several chips and rust patches
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- An outdated colour you’d like to change
Questions to ask before you book
- If travel is included in the price
- Whether they match the colour on site
- How to look after the finish
- What prep work is covered
Covering Wyke Common
Wyke Common is about 2 miles north of Brighouse, in Bradford. We travel to homes and businesses in Wyke Common, so there is no workshop to go to. We cover 140 places across Bradford. You can also see our page for Leeds, about 10 miles away.
Our visits in BD12 and BD19 work the same way as everywhere else we cover. Jobs here include addresses on Wyke Lane, Clare Road and Green Lane and the roads around them. Wyke Common sits on or near the A58, which makes travel easy. We also travel to Wyke (1 mile south-west), Lower Wyke (1 mile south-west), Scholes (1 mile south-east), Norwood Green (1 mile west) and Low Moor (1 mile north). Further out, we also cover Bradford (4 miles north), Keighley (11 miles north-west), Bingley (8 miles north), Shipley (6 miles north), Baildon (8 miles north) and Great Horton (3 miles north).
Landmarks near Wyke Common
We visit homes around Wyke Lion pub, Lightcliffe Academy and Westfield United Reform Church. For rail, the closest station is Low Moor station, about 1 mile north-east. Nearby you will also find Westwood Park Community Hospital (2.9 miles north-west) and Westfield Bradford (4 miles north).
- Parks and local facilities nearby include Halifax Rural District (2.5 miles south-west)
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Landlord and trade work in Wyke Common
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- We leave the room as we found it
- Fixed prices from your photos
- Same prices wherever you are
- Everything repaired in place
See our prices page or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The colour and finish to match
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- The material, if you know it
- Where you are, by postcode
- One picture of the whole bath
- Natural light rather than flash
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Questions from Wyke Common
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
About our accreditations · Every repair comes with a one-year guarantee.
