Torfaen · Wales
Bath re-enamelling & resurfacing in Lowlands, Torfaen
Bath re-enamelling across Lowlands and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How we handle bath re-enamelling in Lowlands
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for thin, worn enamel in places and staining under the taps and around the waste, in acrylic baths, Victorian roll-tops and basins & shower trays.
Every repair is covered by a one-year guarantee.
- Where
- Lowlands (NP44, NP4)
- Region
- Torfaen
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Lowlands
Also in Lowlands
What a repair can’t fix
We’d rather lose a job than do one that will not last, so these are the limits:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Lowlands
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a full day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Lowlands: your questions answered
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Do not let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About Lowlands
Lowlands is about 1 mile north of Cwmbrân, in Torfaen. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Lowlands is one of 67 towns and villages in Torfaen we cover. We work right across the region, from Lowlands to Birmingham (74 miles away).
Postcode districts we cover here: NP44 and NP4. Whether you live on Cadoc Road, Church Road and Dingle Lane or a nearby road, we can come to you. Other places close to Lowlands include West Pontnewydd (1 mile south), Pont-rhyd-yr-ynn (1 mile east), Pontnewydd (1 mile east), Upper Cwmbrân (1 mile west) and Springvale (1 mile south). Further out, we also cover Abersychan (5 miles north), Blaenavon (8 miles north), Wainfelin (3 miles north), Sowhill (3 miles north), Rifle Green (8 miles north) and Trevethin (3 miles north).
What’s near Lowlands
In Lowlands, that means homes near Church of the Holy Trinity, Croesyceiliog School and Pontnewydd Primary School, among other places. Nearby too are Woodland Road Park (1.1 miles south-east) and Cross Keys Inn (within half a mile north-east). For rail, the closest station is Cwmbran station, roughly 0.9 miles south-east. Further afield, we also cover the area around County Hospital (1.7 miles north) and Red Castle (2.3 miles south). Green spaces nearby include Mynydd Twyn-glas and Cwm Lickey Lake.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Where the damage is and how we get to it
- What kind of damage it is
- Doing more than one item at once
- The colour and finish to match
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- What it’s made of, if you know
- Natural light rather than flash
- A coin or ruler next to the damage for scale
If you’re in Lowlands and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Repair or replace: which is better?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the next day. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Nothing taken out or refitted
- Colour-matched on site
- One price list for the entire UK
- Most jobs done in one visit
Read our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
