Lincolnshire · England
Bath re-enamelling & resurfacing in Ludford, Lincolnshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Ludford. Free, fixed quotes from your photos.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
When a repair is not the answer
To be straight with you, some problems need a different fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Ludford
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Bath re-enamelling in Ludford, done in place
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and the jobs we see most are staining under the taps and around the waste and lots of chips and rust spots.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Where
- Ludford (LN8)
- Area hub
- Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Ludford
Also in Ludford
Do you need bath re-enamelling in Ludford?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- An old resurfacing that’s failing
- Thin, worn enamel in places
- A coloured bath you want in white
- Staining under the taps and around the waste
Questions to ask before you book
- What prep work is covered
- How the colour is matched
- What happens if the damage is worse than the photos show
- How soon you can use it again
Ludford questions
Which areas do you work in?
Everywhere in the UK, Ludford included. Travel is included in the price.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
How much does bath re-enamelling cost in Ludford?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Ludford and nearby
Ludford is about 8 miles west of Louth, in Lincolnshire. Clients in Ludford get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We work in 732 places across Lincolnshire, from the larger towns to small villages. We work right across the region, from Ludford to Leeds (63 miles away).
Postcode districts we cover here: LN8. Jobs here include addresses on Bain Rise, Kiln Hill and Magna Mile and the roads around them. If you’re just outside Ludford, we cover Girsby Vale (2 miles south-east), North Willingham (2 miles west), Burgh on Bain (2 miles south-east), Hainton (3 miles south) and Tealby (3 miles west). Further out, we also cover Louth (8 miles east), New Waltham (11 miles north-east), Horncastle (13 miles south), Humberston (13 miles north-east), Market Rasen (6 miles west) and Welton (13 miles south-west).
Around Ludford
Around Ludford, we work in homes near The Black Horse Inn and Church of St Mary and St Peter. Other landmarks nearby include Benniworth Castle (4.8 miles south).
Looking after it afterwards
It’s all simple stuff:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Don’t leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What affects the price in Ludford
Resurfacing from £350. You will know the full cost before you book. We look at:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- The colour and finish to match
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Where you are, by postcode
Send us photos of the damage and one of the entire item, and tell us you are in Ludford, and we will come back with a fixed quote.
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a full day for most jobs. We leave the room clean and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- One price list for the entire UK
- Rooms protected and left tidy
- No need to remove anything
- Straight answers about what a repair can do
Read our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
