Lincolnshire · England
Bath re-enamelling & resurfacing in Tealby, Lincolnshire
Full bath re-enamelling and resurfacing at your home in Tealby, with a one-year guarantee on every repair.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
Bath re-enamelling at your home in Tealby
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We work on Victorian roll-tops, cast iron baths and acrylic baths, and people most often call us about a coating lifting around the plughole and a coloured bath you want in white.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Tealby (LN8)
- County
- Lincolnshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Tealby
Resurfacing from £350. We give every job a fixed price from photos. These are the things that affect it:
- Any earlier repairs that need removing first
- What kind of damage it is
- The material and finish
- How hard the colour is to match
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- A clear, close picture of the problem area
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Common problems we fix in Tealby
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Keep an eye out for these signs:
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Several chips and rust patches
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
- Aftercare advice
- Whether cleaning and preparation are in the price
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Your questions about bath re-enamelling in Tealby
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do you cover Tealby?
We do. Repair technicians travel to Tealby from across the region, and the price is the same as everywhere else.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How do I get a price for bath re-enamelling in Tealby?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
When a repair isn’t the answer
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Send us photos and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
What we do, step by step
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow most of the day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Ask for a price
If you are in Tealby and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
About Tealby
Tealby is about 11 miles west of Louth, in Lincolnshire. Clients in Tealby get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Tealby is one of 732 towns and villages in Lincolnshire we cover. Our nearest city page is Leeds, about 60 miles away.
Jobs in LN8 are booked in the same way as anywhere else. We regularly work on streets such as Cow Lane, Millfield Close and Old Barn Drive and the roads around them. Nearby, we also work in Tealby Thorpe (1 mile south-west), North Willingham (1 mile south), Walesby (2 miles north-west), Ludford (3 miles east) and Market Rasen (3 miles west). We also work in nearby towns such as Louth (11 miles east), New Waltham (12 miles north-east), Horncastle (15 miles south-east), Humberston (14 miles north-east), Ermine (15 miles south-west) and Welton (11 miles south-west).
Local landmarks in Tealby
Typical jobs here are in homes near Church of All Saints and Tealby School, among other places. Tealby’s nearest station is Market Rasen station, roughly 3.2 miles west. Not far away are Wolds Top.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- Free fixed quotes from pictures
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
Read our pricing and bath cost comparison.
What else we do in Tealby
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
