Kent · England
Bath re-enamelling & resurfacing in Lunsford, Kent
Fixed-price bath re-enamelling in Lunsford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
What a repair cannot fix
It helps to know what we can’t do too:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly.
Materials we work on in Lunsford
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Bath re-enamelling in Lunsford without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We regularly repair cast iron baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are several chips and rust patches and brown or grey marks that don’t clean off.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Lunsford (ME20)
- Area hub
- Kent
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Lunsford
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Our work in Lunsford
Lunsford is about 5 miles north-west of Maidstone, in Kent. From the centre of Lunsford to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 922 places across Kent, from the larger towns to small villages. Our jobs stretch from Lunsford to London (about 26 miles away).
Here we cover the ME20 postcode area. Streets in the area include Sassoon Close, Chaucer Way and Masefield Road, all of which we cover. Close by, we cover New Hythe (1 mile east), Larkfield (1 mile south), Leybourne (1 mile south-west), Snodland (1 mile north) and Birling (1 mile west). Within a short drive, we also cover Maidstone (5 miles south-east), Sittingbourne (13 miles east), Dartford (13 miles north-west), Sevenoaks (11 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (9 miles north).
Around Lunsford
In Lunsford, that means homes near Church of the Holy Trinity, Leybourne Lakes Country Park and The Holmesdale School, among other places. Also close by are Lunsford Primary School (0.5 miles south), Freemasons Arms (0.6 miles north) and The Malling School (1.4 miles south). The closest station to Lunsford is New Hythe station, about 0.7 miles east of the centre. Further afield, we also cover the area around Maidstone Hospital (3.2 miles south-east) and Leybourne Castle (0.9 miles south-west). Not far away are Blue Bell Hill and Burham Down.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we are called out for in Lunsford
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People usually call us when they notice one of these:
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Comparing quotes
- Is the price fixed, and does it include VAT?
- Aftercare advice
- What prep work is covered
- If travel is included in the price
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Do not use the bath until it has fully cured
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
For landlords and businesses
For anyone letting property in or around Lunsford, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
More services for Lunsford
Repairing versus replacing in Lunsford
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why us?
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
See our pricing and guide to resurfacing and replacement costs.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take the best part of a day, including clearing up.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Keep a parking space free if you can
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Read more
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
