Wakefield · England

Bath re-enamelling & resurfacing in Lupset, Wakefield

Damaged bath in Lupset? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Lupset?

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • An acrylic bath that flexes badly underfoot
  • Damage hidden under a previous coating, until it’s stripped back
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Lupset

  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

About our bath re-enamelling in Lupset

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We’re often asked to fix a bath in a colour that no longer suits and enamel that’s lost its shine and feels rough, across acrylic baths, pressed steel baths and cast iron baths.

Every repair is covered by our one-year guarantee, wherever you are in Wakefield.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Lupset (WF2, WF4)
Area hub
Wakefield
Cover
One year on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

About Lupset

Lupset is about 2 miles south-west of Wakefield, in Wakefield. Whether you are in the middle of Lupset or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 101 towns and villages across Wakefield. Our nearest city page is Leeds, about 10 miles away.

Postcode districts we cover here: WF2 and WF4. Whether you live on Hall Road, Milton Road and School Road or anywhere nearby, a technician can come to you. If you’re just outside Lupset, we cover Thornes (1 mile east), Flanshaw (1 mile north), Horbury (1 mile south-west), Alverthorpe (1 mile north) and Durkar (1 mile south). Larger places within reach include Castleford (8 miles north-east), Pontefract (9 miles east), Normanton (5 miles north-east), South Kirkby and Moorthorpe (11 miles south-east), South Elmsall (11 miles south-east) and Knottingley (12 miles east).

Landmarks near Lupset

Typical jobs here are in homes near Thornes Park, The Lupset pub and St George's Church, among other places. Nearby too are Cathedral Academy (0.6 miles east) and Wakefield Snapethorpe Primary School (less than half a mile west). Lupset’s nearest station is Wakefield Westgate station, roughly 1.3 miles north-east. Well-known places in the area include Clayton Hospital (1.7 miles north-east) and Sandal Castle (1.8 miles south-east). Not far away are Jaw Hill and Calder Park Wetlands Nature Reserve.

Map of Lupset © OpenStreetMap contributors

What bath re-enamelling costs

Prices start from £350. There are no hourly rates or hidden extras. The price depends on:

  • Where the damage is and how we get to it
  • What the surface is made of
  • How many items we do on one visit
  • The size and number of damaged areas

Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send photos for a quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • The material, if you know it
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Repair dripping taps early
  • Wipe the bath dry after use in hard water areas
  • Clean with a soft cloth and mild detergent
  • Respect the curing time we give you

A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Your questions about bath re-enamelling in Lupset

How do I get a price for bath re-enamelling in Lupset?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes. Removing the old finish takes extra time, which we include in the price.

Do you work in Lupset?

Yes. We cover the entire UK and travel to Lupset. Send us photos for a fixed quote, or call 0345 017 0787.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Are there extra charges for Lupset?

We do not add a call-out fee. The fixed price covers the visit and the work.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Repair or replace: which is better?

Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • Colours mixed by hand to suit your surface
  • No need to remove anything
  • Typically one visit, start to finish

See our prices page and resurfacing vs replacement cost guide.

Landlords, agents and businesses in Lupset

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

How the visit works

We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the next day, the bath is ready.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Clear the area around the damage
  • Let the surface dry out before the visit

How to get a price

To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.