Wakefield · England

Bath Re-enamelling in Alverthorpe

Full bath re-enamelling and resurfacing at your home in Alverthorpe, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Alverthorpe

What bath re-enamelling costs

Resurfacing from £350. There is no area surcharge for Alverthorpe. What changes the price is:

  • How much damage there is
  • Unusual colours or finishes
  • What kind of damage it is
  • Whether old repairs or coatings need taking off

Our prices are the same across the UK, with no extra for Alverthorpe. The job itself decides the price: the material, the amount of damage and how many items.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • A close-up of the damage, in focus
  • Details of any past repairs
  • Natural light rather than flash
  • A wider photo showing the entire bath

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Bath re-enamelling at your home in Alverthorpe

We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for lots of chips and rust spots and worn patches where water runs and sits, in cast iron baths, Victorian roll-tops and pressed steel baths.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Location
Alverthorpe (WF2, WF5, WF1)
Region
Wakefield
Cover
A year, on every repair
Price
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Repair dripping taps early
  • Keep suction mats out of the bath
  • Dry the bath after use to stop limescale
  • Keep toiletries on a shelf rather than in the bath

Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.

When we would advise against a repair

To be straight with you, there are a few things a repair will not fix:

  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)
  • A cast iron or steel bath that is cracked right through

If in doubt, send photos and we will say what we think.

Materials we work on in Alverthorpe

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays

How the visit works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the following day.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Tell us about parking, stairs or access
  • Tell us if there are stairs or a lift

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Related advice

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

If you manage property in Alverthorpe, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

Should you replace it?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Why book with us

  • Everything repaired in place
  • We will tell you if it’s not worth repairing
  • Normally one visit, start to finish
  • Rooms protected and left tidy

See our full price list and bath cost comparison.

Alverthorpe and nearby

Alverthorpe is about 1 mile west of Wakefield, in Wakefield. Clients in Alverthorpe get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Our repair technicians cover 101 places across Wakefield, from the larger towns to small villages. We work right across the region, from Alverthorpe to Leeds (about 8 miles away).

All of WF2, WF5 and WF1 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Green Lane, Childs Road and Willow Road and the roads around them. If you are just outside Alverthorpe, we cover Flanshaw (1 mile south-east), Wrenthorpe (1 mile north-east), Lupset (1 mile south), Thornes (2 miles south-east) and Ossett (2 miles west). Within a short drive, we also cover Castleford (8 miles east), Pontefract (9 miles east), Normanton (5 miles east), South Kirkby and Moorthorpe (11 miles south-east), South Elmsall (12 miles south-east) and Knottingley (11 miles east).

Landmarks near Alverthorpe

Around Alverthorpe, we work in homes near The Cock Inn, Alverthorpe St Paul's CofE (VA) School and Thornes Park. You will also find Wakefield Girls' High School (1.1 miles east) and Church of St Paul (under half a mile north). The closest station to Alverthorpe is Wakefield Westgate station, roughly 1.1 miles south-east of the centre. Nearby you will also find Sandal Castle (2.7 miles south-east) and Clayton Hospital (1.1 miles east). Green spaces nearby include Jaw Hill and Calder Park Wetlands Nature Reserve.

Map of Alverthorpe © OpenStreetMap contributors

Your questions about bath re-enamelling in Alverthorpe

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Can you fix a peeling bath coating?

In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Can I add another job to the visit?

Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.

Do the materials smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we will do the rest.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Common problems we fix in Alverthorpe

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Typical reasons for a call-out include:

  • Wear marks under the taps
  • A period or roll-top bath worth keeping
  • An outdated colour you’d like to change
  • Stains that won’t shift

What to look for in a quote

  • What the guarantee covers, and for how long
  • Who will actually do the work
  • How the room is protected while they work
  • Whether cleaning and preparation are in the price

10 questions to ask before booking

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.