Herefordshire · England
Bath Re-enamelling in Luston
Bath re-enamelling in and around Luston: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our bath re-enamelling in Luston
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on Victorian roll-tops, basins & shower trays and acrylic baths, and people most frequently call us about worn patches where water runs and sits and an old resurfacing that’s failing.
All our work comes with a one-year guarantee, wherever you are in Herefordshire.
- Location
- Luston (HR6)
- County
- Herefordshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
About Luston
Luston is about 15 miles north of Hereford, in Herefordshire. Whether you are in the middle of Luston or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 255 places across Herefordshire, from the larger towns to small villages. We work right across the region, from Luston to Birmingham (about 39 miles away).
Our visits in HR6 are booked in the same way as anywhere else. Local streets include Townsend Park, Westland View and Eye Lane, and we cover them all. Close by, we cover Eye (1 mile north-east), Bicton (1 mile west), Yarpole (2 miles north-west), Bircher (2 miles north-west) and The Broad (2 miles south). We also work in nearby towns such as Hereford (15 miles south), Leominster (3 miles south), Whitecross (14 miles south), Eign Hill (15 miles south), Widemarsh (14 miles south) and Bartonsham (15 miles south).
Landmarks near Luston
We visit homes around Church of St Peter and St Paul, Luston Primary School and The Balance Inn, among other places. The nearest railway station is Leominster station, about 3 miles south. Other landmarks nearby include Earthworks SE of Lower Ashton Farm (2.1 miles east). Green spaces nearby include Dionscourt Hill.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Luston questions
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do you work in Luston?
Yes. We work across the UK and travel to Luston. Send us photos for a fixed quote, or call 0345 017 0787.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How much does bath re-enamelling cost in Luston?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your HR6 postcode.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What kind of damage it is
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- How many areas need work
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Any earlier repairs or coatings
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Repairing versus replacing in Luston
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- Fixed prices from your pictures
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
Read our prices page or resurfacing vs replacement cost guide.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Tell us if there are stairs or a lift
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Related advice
Do you need bath re-enamelling in Luston?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Send us a picture if you notice any of these:
- Staining under the taps and around the waste
- A roll-top that’s seen better days
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
Before booking anyone
- How the room is protected while they work
- A fixed quote, and whether VAT is included
- What preparation is included
- How changes to the job are handled
Other services in Luston
Keeping it looking good
Simple care helps the repair last. We recommend:
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
- Don’t let dyes or oils sit on the finish
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
