Worcestershire · England
Bath Re-enamelling for Lydiate Ash homes
We travel to Lydiate Ash for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
Bath re-enamelling at your home in Lydiate Ash
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair basins & shower trays, Victorian roll-tops and acrylic baths, and the jobs we see most are a period or roll-top bath worth keeping and an outdated colour you’d like to change.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Where
- Lydiate Ash (B61, B60)
- County
- Worcestershire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Also near Lydiate Ash
Other services in Lydiate Ash
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Lydiate Ash, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Unusual colours or finishes
- What kind of damage it is
- How many items we do on one visit
- How many areas need work
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Try to send:
- The material, if you know it
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Most clients in Lydiate Ash get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Lydiate Ash and nearby
Lydiate Ash is about 3 miles north of Bromsgrove, in Worcestershire. We visit homes and businesses in Lydiate Ash, so you don’t need to take anything anywhere. Lydiate Ash is one of 376 towns and villages in Worcestershire we cover. Our nearest city page is Birmingham, about 9 miles away.
Jobs in B61 and B60 are booked in the same way as anywhere else. Whether you live on Lydiate Ash Road, Birmingham Road and Alvechurch Highway or anywhere nearby, we can come to you. We also cover the places around Lydiate Ash: Lower Marlbrook (1 mile south), Upper Marlbrook (1 mile south), Marlbrook (1 mile south), Wildmoor (1 mile west) and Catshill (1 mile south-west). We also work in nearby towns such as Worcester (14 miles south-west), Redditch (7 miles south-east), Kidderminster (9 miles west), Bromsgrove (3 miles south), Droitwich Spa (9 miles south-west) and Stourport-on-Severn (11 miles west).
Around Lydiate Ash
We visit homes around Lickey Hills Primary School and Nursery, Lickey Hills Country Park and Waseley Hills High School and the streets around them. You’ll also find St Luke (0.7 miles south) and The Wildmoor Oak pub (0.8 miles north-west). The nearest railway station is Barnt Green station, about 2.3 miles south-east of the centre. Well-known places in the area include Castlebourne folly (2 miles north-west) and Barnsley Hall Hospital (1.8 miles south-west). Not far away are Bilberry Hill and Chaddesley Woods National Nature Reserve.
When to call us in Lydiate Ash
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we’re called about are:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
What your quote should include
- How long the guarantee is and what it covers
- What aftercare is recommended
- When it can be used again
- Whether there are any call-out or travel charges
Repair or replace: which is better?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the next day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Lydiate Ash
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- Colour mixed on the day to match
Read our full price list or bath cost comparison.
Lydiate Ash: your questions answered
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
- Tell us about parking, stairs or access
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Advice
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Repair dripping taps early
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
