Somerset · England
Bath re-enamelling & resurfacing in Lyng, Somerset
We travel to Lyng for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Normally one visit, start to finish
- A fixed quote before booking
- Colour mixed on the day to match
- Honest advice, even when it means no job
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Lyng, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people contact us are a peeling or bubbling previous coating and an outdated colour you’d like to change.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Lyng (TA3)
- Area hub
- Somerset
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Lyng
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Customers normally contact us about:
- Staining under the taps and around the waste
- Wear marks under the taps
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
What to look for in a quote
- What prep work is covered
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- How the room is protected while they work
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It generally takes most of the day, and you are welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
How to prepare
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
When a repair is not the answer
A repair is not right for every job, for example:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Questions from Lyng
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you price it without visiting?
Nearly always. If photos do not show enough, we will ask for another angle.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
How do I get a price for bath re-enamelling in Lyng?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Somerset.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Looking after it afterwards
Looking after the surface is easy:
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Covering Lyng
Lyng is about 5 miles south of Bridgwater, in Somerset. Whether you are in the middle of Lyng or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 640 towns and villages across Somerset.
Our visits in TA3 work the same way as everywhere else we cover. From Northmoor Lane, Hill View Terrace and Main Road or a nearby road, a technician can come to you. Neighbouring places we cover include East Lyng (1 mile north-east), West Lyng (1 mile south-west), Curload (1 mile east), St Michael Church (1 mile north-west) and Athelney (1 mile east). Larger places within reach include Taunton (7 miles south-west), Bridgwater (5 miles north), Chard (12 miles south), Burnham-on-Sea (13 miles north), Wellington (13 miles south-west) and Street (11 miles north-east).
Local landmarks in Lyng
Typical jobs here are in homes near Church of St Bartholomew. Nearby you’ll also find Willows and Wetlands Visitor Centre (1.3 miles south-east). For a walk, there is Swell Wood RSPB Nature Reserve and Burrow Mump.
Other services in Lyng
What affects the price in Lyng
Prices start from £350. Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- What the surface is made of
- How many items we do on one visit
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- A coin beside the damage so we can judge size
- The material, if you know it
- One sharp close-up of the damage
If you are in Lyng and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
