Somerset · England
Bath re-enamelling & resurfacing in Stoke St Gregory, Somerset
Bath re-enamelling across Stoke St Gregory and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
When we would advise against a repair
A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- A bath that’s rusted through
Send us photos and we’ll tell you honestly before booking.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
About our bath re-enamelling in Stoke St Gregory
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s an old resurfacing that’s failing and staining under the taps and around the waste, we can generally put it right, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Stoke St Gregory (TA3)
- County
- Somerset
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
About Stoke St Gregory
Stoke St Gregory is about 7 miles south-east of Bridgwater, in Somerset. Jobs in Stoke St Gregory are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 640 places in Somerset, from the larger towns to small villages.
Here we cover the TA3 postcode area. Streets in the area include Broomfield Park, Willey Road and Church Close, all of which we cover. We also cover the places around Stoke St Gregory: Curload (1 mile north-west), Huntham (1 mile south-west), Athelney (1 mile north), East Lyng (1 mile north-west) and Lyng (1 mile north-west). Within a short drive, we also cover Taunton (7 miles west), Bridgwater (7 miles north-west), Yeovil (14 miles south-east), Chard (12 miles south), Burnham-on-Sea (14 miles north) and Wellington (14 miles west).
Landmarks near Stoke St Gregory
Around Stoke St Gregory, we work in homes near Stoke St Gregory Church of England Primary School, Royal Oak pub and Church of St Gregory, among other places. Other landmarks nearby include Willows and Wetlands Visitor Centre (within half a mile north-west). The countryside around Stoke St Gregory includes West Sedgemoor RSPB reserve and Burrow Mump.
How it works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Do not leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Do you need bath re-enamelling in Stoke St Gregory?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Signs it’s time to call us include:
- A coloured bath you want in white
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Questions to ask before booking
- How long it needs to cure
- Whether the price covers travel
- How long the guarantee is and what it covers
- Aftercare advice
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Doing more than one item at once
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Any details about the material
If you’re in Stoke St Gregory and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Questions from Stoke St Gregory
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you come to Stoke St Gregory?
Yes. We work across the UK and travel to Stoke St Gregory and the rest of Somerset. Send us pictures for a fixed quote, or call 0345 017 0787.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
More services for Stoke St Gregory
Repairing versus replacing in Stoke St Gregory
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Stoke St Gregory customers choose us
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- Fixed prices from your photos
- One-year guarantee on every repair
See our pricing or bath cost comparison.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
