Cornwall · England
Bath Re-enamelling in Manaccan
Bath re-enamelling in Manaccan without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
About our bath re-enamelling in Manaccan
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and people most often call us about stains that won’t shift and a bath that stays dull however much you clean it.
You get a one-year guarantee, the same in Manaccan as everywhere else we work.
- Area
- Manaccan (TR12)
- Area hub
- Cornwall
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the next day. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- Normally one visit, start to finish
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
Read our pricing or guide to resurfacing and replacement costs.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
FAQs for Manaccan
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
How long does re-enamelling take?
Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Do you work in Manaccan?
We do. We send a technician to Manaccan for every job, with no extra charge for travel.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
What affects the price in Manaccan
Prices start from £350. We do not charge extra for travel to Manaccan. The price comes down to:
- Whether we combine several jobs
- The material
- What kind of damage it is
- Any earlier repairs that need removing first
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- Something in shot to show the size
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- Natural light rather than flash
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Manaccan and nearby
Manaccan is about 5 miles south-west of Falmouth, in Cornwall. Customers in Manaccan get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Manaccan is one of 644 places in Cornwall we cover.
We cover every part of TR12 and the streets around it. From Minster Meadow, Minster Fields and Vicarage Lane or a nearby road, we can come to you. Close by, we cover Helford (1 mile north-west), Tregidden (1 mile south), Newtown (2 miles south-west), St Martin (2 miles south-west) and Bishop's Quay (3 miles west). Within a short drive, we also cover Truro (13 miles north), Falmouth (5 miles north-east), Camborne (12 miles north-west), Redruth (11 miles north-west), Helston (6 miles west) and Hayle (14 miles north-west).
Near you in Manaccan
In Manaccan, that means homes near Church of Saint Manacca. The nearest railway station is Penmere station, about 5 miles north-east of the centre. A little further out are Constantine Museum and Archive (3.1 miles north-west) and Falmouth Community Hospital (5.3 miles north). Green spaces nearby include Goonhilly Downs.
Aftercare tips
Looking after the surface is easy:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Also in Manaccan
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say immediately whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
