Nottinghamshire · England

Bath re-enamelling & resurfacing in Manton, Nottinghamshire

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Manton. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Manton homes

Bath re-enamelling at your home in Manton

Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We’re frequently asked to fix a bath that stays dull however much you clean it and lots of chips and rust spots, in pressed steel baths, acrylic baths and cast iron baths.

Every repair comes with our one-year guarantee, wherever you are in Nottinghamshire.

Location
Manton (S80, S81)
Area hub
Nottinghamshire
Cover
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

How the visit works

We turn up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Before we arrive

  • Keep pets and children out of the room while we work
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

Ask for a price

To get a price, send a couple of photos using our quote form or ring us. We will say right away if a repair is the right fix.

Get a free quote

Read more

Honest limits

A repair isn’t always the answer, and we will tell you before we start. We cannot fix:

  • Damage hidden under a previous coating, until it’s stripped back
  • An acrylic bath that flexes badly underfoot
  • Steel that has corroded right through

Not sure? Send pictures and we’ll give you a straight answer before you book.

Surfaces we repair

  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops

Keeping it looking good

It’s all simple stuff:

  • Store bottles off the bath
  • Wipe the bath dry after use in hard water areas
  • Have chips seen to early
  • Clean with a soft cloth and mild detergent

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Manton and nearby

Manton is about 1 mile south-east of Worksop, in Nottinghamshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 329 towns and villages in Nottinghamshire. Our jobs stretch from Manton to Leeds (about 40 miles away).

Every address in S80 and S81 is within our area. Local streets include Talbot Road, Bean Avenue and South Avenue. Manton is on the A57, which makes it straightforward to reach. Other places close to Manton include Bracebridge (1 mile north-east), Kilton (1 mile north), Worksop (1 mile north-west), Rhodesia (2 miles north-west) and Gateford (3 miles north-west). Larger places within reach include Mansfield (11 miles south), Sutton in Ashfield (13 miles south-west), Retford (7 miles east), Mansfield Woodhouse (10 miles south), Kirkby-in-Ashfield (15 miles south-west) and Forest Town (10 miles south).

Landmarks near Manton

Our customers here include homes close to The Tailor Made Programmes Team, Outwood Academy Portland and The Old Ship Inn. Nearby too are Worksop Priory Church of England Primary Academy (less than half a mile west) and St Paul (under half a mile south). Manton’s nearest station is Worksop station, roughly 1 mile north-west. Nearby you’ll also find Worksop Castle (0.7 miles west) and Bassetlaw Hospital (1.2 miles north). For a walk, there’s Sandhill Lake.

Map of Manton © OpenStreetMap contributors

Repair or replace in Manton?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Why choose Surface Doctor in Manton

  • No need to remove anything
  • Most jobs done in one visit
  • One-year guarantee on every repair
  • Same prices wherever you are

Take a look at our pricing or guide to resurfacing and replacement costs.

Signs you need bath re-enamelling in Manton

Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Common reasons people in Manton contact us include:

  • Lots of chips and rust spots
  • A peeling or bubbling previous coating
  • Worn patches where water runs and sits
  • A roll-top that is seen better days

What your quote should include

  • How the room is protected while they work
  • When it can be used again
  • What the guarantee covers, and for how long
  • Whether the colour is mixed to match

Our hiring checklist

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Common questions in Manton

Will the new finish last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Will there be fumes?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.

Is a repair better than a new one?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How long will the bath be out of use?

Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Manton.

What happens if you find more damage?

Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.